front and balance rail pins/Kenny

Piannaman@aol.com Piannaman@aol.com
Fri, 25 Jul 2003 23:51:20 EDT


---------------------- multipart/alternative attachment
Hello Kenny,

I think it would be helpful if you included the message you are responding to 
in your posts, or at least pertinent parts of it.  I often don't know what 
you are referring to when you send a message to the list.

Thanks,

Dave Stahl

In a message dated 7/25/03 12:17:21 PM Pacific Daylight Time, 
kennyfin@jetstream.net writes:


> Hi Terry!
>  
> Take a piece of superfine steel wool, put a drop of oil on it, start at 
> number one, or number 88, it doesn't matter which end you start, and scrub it. As 
> you move on to the next one, and the next, before you know it you are there.
>  
> But right! Is there and easier way?
>  
> Kenny Finlayson, RPT
> 



---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/3c/c8/e5/10/attachment.htm

---------------------- multipart/alternative attachment--

This PTG archive page provided courtesy of Moy Piano Service, LLC