----- Original Message ----- From: "Farrell" <mfarrel2@tampabay.rr.com> To: "Pianotech" <pianotech@ptg.org> Sent: July 26, 2003 3:24 AM Subject: Re: Screwing down the board: was Re: soundboardinstal again > To what end would one use a cap on a cut-off bar? Why would this glue joint benefit from a cap and not the rest of the rim? > It looks better than leaving an open gap between the active soundboard and the filler piece. Del
This PTG archive page provided courtesy of Moy Piano Service, LLC