Hi John, It was a carriage bolt before it became a tuning pin. At 06:13 PM 6/3/2003 -0300, you wrote: >Hi, >Just how big is that replaced pin on the top layer? >Is #6, the largest pin available? >Regards, >John M. Ross >Windsor, Nova Scotia, Canada >jrpiano@win.eastlink.ca >----- Original Message ----- >From: "Don" <pianotuna@accesscomm.ca> >To: "Pianotech" <pianotech@ptg.org> >Sent: Monday, June 02, 2003 10:08 PM >Subject: Re: Piano Recording, was: Soundboard #001 Finished > > >> Hi, >> >> Here is what one "good ole boy" tuner did a few tens of years ago for a >> tuning pin that was too loose. >> >> [Photo at:] >> >> https://www.moypiano.com/ptg/files/attachments/d3/3a/38/15/ >> Picture048.jpg >> >> [Alternate URL:] >> >> http://tinyurl.com/ddwo >> >> Regards, >> Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T. >> >> mailto:pianotuna@accesscomm.ca >> http://us.geocities.com/drpt1948/ >> >> 3004 Grant Rd. >> REGINA, SK >> S4S 5G7 >> 306-352-3620 or 1-888-29t-uner >> _______________________________________________ >> Files list info: http://ptg.org/mailman/listinfo/files >> >> _______________________________________________ >> pianotech list info: https://www.moypiano.com/resources/#archives >> > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives > > Regards, Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T. mailto:pianotuna@accesscomm.ca http://us.geocities.com/drpt1948/ 3004 Grant Rd. REGINA, SK S4S 5G7 306-352-3620 or 1-888-29t-uner
This PTG archive page provided courtesy of Moy Piano Service, LLC