Stienway sustenuto bar

[Delwin D Fandrich]

----- Original Message -----
From: "Bill Pillmore" <billpillmore@earthlink.net>
To: "PTG" <pianotech@ptg.org>
Sent: June 06, 2003 7:53 AM
Subject: Re: Stienway sustenuto bar


> Thanks for the reply.  I was hoping someone might say a metal epoxy has
> worked form them so I wouldn't have to get out the torch.
> Thanks
> Bill
>

I'm a big fan of the appropriate use of epoxy, but...this is one place
where I would not use it. Any type of solder will be an improvement.

Del