For table tops, I think it's better to use shellac in the French polishing style by rubbing a thinner cut (2lb) with wadding or cheese cloth and steel wool between coats. David Love davidlovepianos@earthlink.net > [Original Message] > From: Richard Moody <remoody@midstatesd.net> > To: Pianotech <pianotech@ptg.org> > Date: 6/7/2003 8:25:59 PM > Subject: Orange shellac need help > > I am refinishing a solid oak table top about the size of a large > upright bottom panel or "kick board" as it is sometimes called on > the old " high back pianos". > > Its out of the can 3lb cut. It is splotchy because of the > overlaps and it dries too fast to brush out the whole top. Is > there a way to get rid of the splotchy areas by brushing with > denatured alcohol? Or is sanding better? It is hard to tell if > it will be splotchy when applying because of the different rates > of drying. > > Why is it so hard for me to get a table top uniform when they used > to do large oak floors and those look uniform? > > Thanks > Richard Moody > > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC