I rebushed some using hot hide glue and it worked. The flange indeed is not holding very firmly the bushing, once a center pin is inserted the whole thing is holding together. I had no better idea when it comes to the glue choice ! Best wishes Isaac OLEG Entretien et reparation de pianos. PianoTech 17 rue de Choisy 94400 VITRY sur SEINE FRANCE tel : 033 01 47 18 06 98 fax : 033 01 47 18 06 90 cell: 06 60 42 58 77 > -----Message d'origine----- > De : pianotech-bounces@ptg.org > [mailto:pianotech-bounces@ptg.org]De la > part de Dave Doremus > Envoye : mercredi 11 juin 2003 14:59 > A : Pianotech > Cc : New Orleans Piano Technicians Group > Objet : Plastic Kawai problem > > > Hi, I have a Kawai KL-703, serial number 1150442, which has > a problem > with loose jack pinning, to the point that it is difficult to > regulate lost motion and they can wobble sideways enough to hit the > neighbor hammer. Anyone have any experience rebushing plastic parts > or am I better off replacing the whippens? > > Also, a minor thing, is there any source for the hinges that attach > the top of the music desk to the front panel? Kawai parts does not > have them and dont know when and if they will. > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC