---------------------- multipart/alternative attachment In a message dated 6/16/03 9:08:28 AM Pacific Daylight Time, joegarrett@earthlink.net writes: > I have been doing Ivory for over 30 years. My choice is PVC-E with Titanium > Dioxide mixed in. I've used everything imaginable, but find this the best > glue. If you make a mistake in alignment, etc., it can be un-done with a wet > rag and hot iron. PVC-E gives you sufficient time to align and clamp. BTW, > the clamping plates, obtained from the supply houses are worthless! I'll > send a photo of the clamps I use. They are made out of anodized aircraft > grade aluminum, 1/4" thick. You will only need 3-6 of them to do your Joe, Thanks for the input. Where would one find these clamps? And would I find the titanium dioxide at a hardware store, or would I have to go through my son's chemistry set to locate some...:-) Dave Stahl ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/0a/d7/e4/64/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC