Striking distance Question was curious Steinway- Lauter Humana

[Keith Roberts]

1/2 what? Depending on the length of the shank, I would guess 1 3/4 inches
to 1 7/8 inches. If you can't determine the bore distance from the old
hammers, I would order them un bored so you can have the new hammers infront
of you when you set up the rail for the new bore distances. Then take them
to your nearest tech with a boring jig and drill press.
Keith Roberts
----- Original Message -----
From: "Harry Pickett" <hjpickett@cablenet-va.com>
To: "'Pianotech'" <pianotech@ptg.org>
Sent: Sunday, June 22, 2003 1:35 PM
Subject: Striking distance Question was curious Steinway- Lauter Humana


> In reference to rebuilding my Lauter Humana
> I really excited by this learning experience.
> I have a question which is probably simplistic at best.
> In regards to the striking distance on the Lauter? I assume that because
> it is a full upright it is 1/2? I need this info to order hammers.
> Thanks for (down) bearing with a novice!
>
> Harry Pickett
>
>
> -----Original Message-----
> From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On
> Behalf Of gordon stelter
> Sent: Sunday, June 22, 2003 2:56 PM
> To: Pianotech
> Subject: RE: Curious Steinway
>
> Lauter Humana is an excellent player piano.
>      Thump
>
> --- Harry Pickett <hjpickett@cablenet-va.com> wrote:
> >
> > Thank you Bruce,
> > I have Larry's book and will contact Steinway.
> > I just bought a Lauter player piano with the Humana
> > mechanism for $50 so
> > I should learn a lot by trying to get it in playable
> > condition. All I
> > can say about it is the pinblock seems to be in
> > great shape as is the
> > sound board.
> > Thanks again
> > Harry
> >
> > Harry & Marilyn Pickett
> > 1800 Fairview Church Road
> > Riner, VA 24149
> > TEL: 540-382-0191
> >
> > -----Original Message-----
> > From: pianotech-bounces@ptg.org
> > [mailto:pianotech-bounces@ptg.org] On
> > Behalf Of bruce greig
> > Sent: Saturday, June 21, 2003 3:29 PM
> > To: Pianotech
> > Subject: Re: Curious Steinway
> >
> > Welcome, Harry -
> > first, count again carefully, (what are the lowest &
> > highest notes?);
> > then have your friend contact the Steinway factory
> > with the serial
> > number and he can get the history of the instrument.
> >  You would probably
> > also enjoy reading Larry Fine's The Piano Book which
> > has an interesting
> > section on Steinway, but there is no mention of such
> > a scaling.
> > Bruce
> >
> >
> >
> >
> > ---- Original Message -----
> > From: Harry <mailto:hjpickett@cablenet-va.com>
> > Pickett
> > To: pianotech@ptg.org
> > Sent: Saturday, June 21, 2003 7:57 AM
> > Subject: Curious Steinway
> >
> > Hi List,
> > As way of introduction..
> > I'm new at this the last year I have been learning
> > as much as possible
> > about piano technology with the Coleman videos,
> > Reblitz and generally
> > getting under the arm pits of any tuner that would
> > let me watch them
> > tune a piano. You can tell I am very experienced-
> > right!
> > A friend has a Steinway C 1878 that has 82 notes,
> > hmmmmm where can I
> > find out about this?
> > Thanks for your help
> > Harry Pickett
> >
> >
> > Harry & Marilyn Pickett
> > 1800 Fairview Church Road
> > Riner, VA 24149
> > TEL: 540-382-0191
> >
> >
> >
>
>
> __________________________________
> Do you Yahoo!?
> SBC Yahoo! DSL - Now only $29.95 per month!
> http://sbc.yahoo.com
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
>
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
>