This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi Richard, I have done some restringings in the house, with no problem. I put a drop cloth on the floor. Have all the sizes of strings you need, including the remanufactured bass strings. Have the oversize pins available. Be sure to support the pinblock. Take the nicks out of the capo, and give it a coat of paraffin wax. Make sure bridge pins are firm, CA works well for this. I have found pin driving fluid to be a positive. Make sure that you check the tightness of the pins, you may have to go up two sizes. If the pins are uniformly loose, you may not have to ream. Make sure that children are not allowed near you, and use eye protection, and ear plugs. Good luck. I am sure others will correct any errors or omissions. :-) Regards, John M. Ross Windsor, Nova Scotia, Canada jrpiano@win.eastlink.ca ----- Original Message ----- From: Richard Strang To: pianotech (E-mail) Sent: Monday, June 23, 2003 12:14 PM Subject: Restringing Hello, all, Piano restringing has always been a little out of my line of work, as I do not have a shop. However, I have a good customer that is requesting me to restring his grand on site, and I'm debating on whether I should accept the job or not. Any advice? Richard ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/96/ff/f1/86/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC