Accu-Just Hitch Pins

[Delwin D Fandrich]

----- Original Message -----
From: "Ron Nossaman" <RNossaman@cox.net>
To: "Pianotech" <pianotech@ptg.org>
Sent: June 26, 2003 5:37 AM
Subject: Re: Accu-Just Hitch Pins


>
> >Two magnets, actually. And it is designed to read out string bearing in
> >terms of percentage of string tension rather than degrees of angle. As
your
> >chart points out. But, and I haven't done the math, I thought it was
0.5%
> >percent per increment on the vial. But, memory fades as time passes.
> >
> >Del
>
>
> Guess who supplied the information I used in the chart for the Baldwin
> gage. That's why I made the chart. Details tend to evaporate on us if
they
> aren't recorded.

The 17 minutes of arc sounds right. It's the percentage of string bearing
against the bridge per increment that sounds off. But, as I said....

Del