If you are not wrong, then Mapes doesn't know what they are asking. Once again, I'll have to go to Baldwin to find out what they say. The hitch pins were quite large, I remember that, so I'll be they are the 1/4 inch variety. I have no idea what other sizes they have. Why couldn't Baldwin just put in a regular hitch pin and plate. I don't hear any great difference for all that "technology". I guess they just wanted to be different. Thanks for the input. Richard -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On Behalf Of Avery Todd Sent: Thursday, June 26, 2003 7:09 PM To: Pianotech Subject: RE: Accu-Just Hitch Pins Richard, I wasn't aware that Baldwin had ever had more than one size of the Accu-Just hitch pins! Am I wrong? Avery At 01:37 PM 06/26/03 -0500, you wrote: >I was contacted by Baldwin today by email. Thomas Malone informed me on >the stringing scheme for the plain strings, but neglected to tell me about >the bearing settings, so I have to get back to him on than. Mapes can make >the strings, but need to know if the hitch pins are the 1/4" variety, so I >have to make another trip back. I have to go back anyway, as I have to >pull a tuning pin to measure it also. Thanks again for all your help. > >Richard >>-----Original Message----- >>From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On >>Behalf Of Kevin E. Ramsey >>Sent: Tuesday, June 24, 2003 9:15 PM >>To: Pianotech >>Subject: Re: Accu-Just Hitch Pins >> >>Hi, Richard. Let us know if and when you get contacted by Baldwin, will >>you please? >>Kevin >>>----- Original Message ----- >>>From: <mailto:rstrang@pa.inter.net>Richard Strang >>>To: <mailto:pianotech@ptg.org>'Pianotech' >>>Sent: Tuesday, June 24, 2003 3:39 PM >>>Subject: RE: Accu-Just Hitch Pins >>> >>>My major problem is I'm alone here in Panama. There are no other >>>technicians around that could possibly help me in a dream. If this >>>Baldwin is so particular as to how the string is put around the hitch >>>pin, God help the ambassador's piano if she gives the job to someone >>>other than me. I will have to buy a down bearing gauge and learn how to >>>use it. I have already sent an email to Baldwin to get information as to >>>the stinging scheme and the down bearing measurements. Thanks for the input. >>> >>>Richard >>> _______________________________________________ pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC