Ron, you will need to know how many Front vs Rear solenoids you need. They are different. Good luck! Dave Smith SW FL ----- Original Message ----- From: "Ron Nossaman" <RNossaman@cox.net> To: "Pianotech" <pianotech@ptg.org> Sent: Saturday, June 28, 2003 3:07 PM Subject: Re: puzzler - not > > >Ron, I encountered this problem with a disklavier and an extremely picky > >customer with an acoustically HARD room. After working through the swapping > >of plungers, etc, I called Yamaha service and they sent me a bag of slightly > >oversized plungers. Solved the clicking problem immediately. Of course a > >couple then were sticky and needed a slight sanding. :) This might be > >the answer if all else fails. > > Ah, I wasn't aware that was an option. Thanks Dave. I may have to do that. > > Ron N > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC