Steve: Is there a possibility that you twisted them the wrong way? dave *********** REPLY SEPARATOR *********** On 3/7/2003 at 8:18 PM Steve Borgstrom wrote: >I repaired a crack in the bass bridge apron on the piano shaped object >I currently own. 1st one ever for me, went ok with a little help from >an RPT friend (my teacher). Was able to do it only removing 8 strings, >whooo hooo! > >My buddy left, I left the piano on the tilter overnight to dry. Put the >strings back on and remembered seeing somewhere that you are supposed >to twist the bass strings to keep the copper from rattling. I went 1 & >1/2 twists on each string and got it back together, put the action back >in and started in tuning. > >Got to the three lowest strings I had removed, F#1, G1 and Ab1. Tried >to bring them up to pitch and they sounded awful, muffled, just what I >thought the twisting was supposed to eliminate. Well, I loosened them, >took them off, let them go where they wanted to, metal memory speaking, >and reattached them. Tuned them up and they sounded just like the other >strings around them. > >My question is, what is this phenomenon? What causes it and how does >one know how much if any twist to put in when putting them on the hitch >pins? > >Thanks all! > > >Steve Borgstrom >Brooklyn Park, MN > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives _____________________________ David M. Porritt dporritt@mail.smu.edu Meadows School of the Arts Southern Methodist University Dallas, TX 75275 _____________________________
This PTG archive page provided courtesy of Moy Piano Service, LLC