"Rake"

[Keith Roberts]

Thanks Joe. Then why would the vertical pitch differ from piano to piano?
What were the factory guys looking at were they decided the bore distance
and vertical pitch. Obviously the two are interconnected if the hammer is
going to hit the string squarely.
Keith Roberts

----- Original Message -----
From: "Joseph Garrett" <joegarrett@earthlink.net>
To: <pianotech@ptg.org>
Sent: Wednesday, March 12, 2003 4:45 PM
Subject: "Rake"


> Hey guys/gals, when we are talking about the angle of the hammer that
> differs from 90 degrees, it is correctly called "Vertical Pitch". One of
> those hidden correct terms. JFYI
> Best Regards,
> Joe Garrett, RPT, (Oregon)
>
> Been There, Didn't Like It, So I'm Here To Stay! [G}
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
>