Oops.......I see indeed you are referring to upright wippens. Geesh, I bought that whole big Renner action part kit thingee....one would think they would put an upright wippen in there also - they did put an upright butt in there. Thanks. I'll pursue this. Terry Farrell ----- Original Message ----- From: "Farrell" <mfarrel2@tampabay.rr.com> To: "Pianotech" <pianotech@ptg.org> Sent: Tuesday, March 18, 2003 9:55 AM Subject: Re: Upright Wippen Replacement > What attachment? You mention many sizes.....are you thinking grand? This is an upright. That is in part what I was referring to if I purchased a wippen that would work except for a short heel - I could cut the bottom of the wippen to whatever appropriate height and glue on a heel to make things work. I was kinda hoping that there would be a good/easy option that did not involve cutting 88 wippens and gluing on heels. > > Terry Farrell > > ----- Original Message ----- > From: "Kerry Cooper" <brispiano@optushome.com.au> > To: "Pianotech" <pianotech@ptg.org> > Sent: Tuesday, March 18, 2003 9:20 AM > Subject: Re: Upright Wippen Replacement > > > > > > > > > > > I am rebuilding the action for a 1913 (or so) Mason & Hamlin upright. It > > has the dowel-capstan (no stickers) arrangement. The heel on the wippen is > > fairly tall. I am looking for advice on what is the best avenue for > > replacement. These things are pretty beat up - they would require complete > > rebuilding - obviously easier and cheaper if I can find replacements. From > > what I have seen in the Schaff and Pianotek catalogs I can get wippens that > > look like they would work except for the heel height - I could saw off my > > wippen heels and glue them on the new wippens, or use some type of add-on > > wippen heels. I could also get the Steinway wippen (it has a choice of > > tallish heels) and perhaps simply replace the flange. > > > > > > It just occurred to me to check with M&H also. I will try that today as > > well. Any other ideas? Thanks. > > > > Renner make many sizes of wippen with tall heels. The attachment has the > > renner drawings. > > > > Kerry Cooper > > Brisbane, > > Australia > > > > > _______________________________________________ > > > pianotech list info: https://www.moypiano.com/resources/#archives > > > > _______________________________________________ > > pianotech list info: https://www.moypiano.com/resources/#archives > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC