This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi Bob: The Samick lag bolt uses a 3/8" allen wrench. They can also be had = in the form of a stub hex with a 3/8" square drive on the other end. = This allows the use of a flex handle or ratchet wrench when mated to it. = More expensive, but easier to use. =20 Mike Kurta ----- Original Message -----=20 From: BobDavis88@aol.com=20 To: pianotech@ptg.org=20 Sent: Wednesday, March 26, 2003 11:44 AM Subject: Samick leg bolt wrench size? Anyone, What is the size of the Allen wrench for the Samick leg bolts? Thanks, Bob Davis=20 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/4d/8a/15/49/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC