Roger Jolly wrote: > > > > Hi Ric, > See if the screws that secure the keybed to the case are > tight. If it's floating a bit, that could cause the problem. The case is > select hardwood and is prone to some shrinkage. > Regards Roger > Will do. I am just about on my way over there, if the room is free today, I'll stick my head in and check out that, and the dags thing, and try flexing a few keys and see what I can find out. Thanks again. btw.... Nils says hi, and I think he's sold on that hammer tailing jig and hanging jig you brought over for me. He borrowed both for a job a couple weeks back is going to order 2 or 3 of each for his shop. Thanks again Rog :) RicB -- Richard Brekne RPT, N.P.T.F. UiB, Bergen, Norway mailto:rbrekne@broadpark.no http://home.broadpark.no/~rbrekne/ricmain.html
This PTG archive page provided courtesy of Moy Piano Service, LLC