---------------------- multipart/alternative attachment In a message dated 5/10/03 6:50:49 PM Pacific Daylight Time, pmc303@ricochet.com writes: > > On some Baldwins the backchecks will hit the rear edge of the fallboard, or > the rod which is attached thereto. You would then have to see if the > fallboard stops are bent or improperly adjusted. > Paul McCloud > San Diego > > > Hi Paul, Thanks for the suggestion. I've seen that before, too, but this isn't it, because it happens when the fallboard is off! Dave ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/27/5a/7d/21/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC