Hi Will, Thanks you. This is something to check for. I worked on an Yamaha C1 today that had 2 underlever weights binding, 5 that had fallen out and many more loose. When I get back to the Henry F. Miller I'll check for this. Norman Barrett ----- Original Message ----- From: <PatchWick@aol.com> To: <pianotech@ptg.org> Sent: Saturday, May 17, 2003 7:27 PM Subject: Re: A New Trouble > I had a similar situation, although it seems that the piano was a newer small > wurlitzer grand, where the problem was loose lead weights in the damper > levers. They would shift enough to bind on a neighbor from time to time. I > recall making many trips to the customers house before I finally figured out > what was going on. I tightened the weights in the the holes and no more > troubles! > > Good luck! > will >
This PTG archive page provided courtesy of Moy Piano Service, LLC