Notching Delignit bridge caps

[Delwin D Fandrich]

----- Original Message ----- 
From: "David Love" <davidlovepianos@earthlink.net>
To: "Pianotech" <pianotech@ptg.org>
Sent: November 02, 2003 9:48 PM
Subject: Re: Notching Delignit bridge caps


> I know Del uses a power notcher and I've seen the entries, I was just
> wondering about using a chisel for those of us who don't have a power
> notcher but who may want to go the Delignit route.
>
> David Love
> davidlovepianos@earthlink.net
>

In that case I would try either an electric or an air powers carving tool
with a flat chisel bit.

Del