----- Original Message ----- From: "Ron Nossaman" <RNossaman@cox.net> To: "Pianotech" <pianotech@ptg.org> Sent: November 03, 2003 10:37 AM Subject: Re: Short Treble (sustain?) > Or, different diameter front and rear bearing bars for each section, > smaller in the bass, bigger in the treble. Then you'd only need three of > the relatively more expensive grooved bar types, maybe using the outside > trichord spacing for the bigger bichords. I wouldn't think the small string > height change at the transitions would be a problem. > > Ron N > --------------------------------------------------------------------------- ----- Only in getting the center rod in place. Those thick wires can get pretty hard to bend. Del
This PTG archive page provided courtesy of Moy Piano Service, LLC