This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi, Not for the trade but only for customers, You must have missed my keytop = and front chop saw jig> <G> Slick if I do say so myself. It may be on = the site. My site is in the process of a MAJOR update that hopefully = will include video instructions for the use of the tools. Any way that = is the latest idea for the site. Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message -----=20 From: Farrell=20 To: Pianotech=20 Sent: Wednesday, November 05, 2003 4:22 AM Subject: KEY Notching File Oh, oh, oh - a key notching file! Daaaaaaaaa! I was trying to picture = how one was going to use a file on a bridge notch. Do you do key tops for the trade? I've been using a couple folks = around town here, but the one's that did good work move away, and the = others, well ........... Terry Farrell ----- Original Message -----=20 From: Joe And Penny Goss=20 To: Pianotech=20 Sent: Tuesday, November 04, 2003 4:20 PM Subject: Re: Wanted Acu-tuner -3 Hi Terry, I use a 1/8" x 3/4" x 48" iron strap that has felt to protect the = new key tops that I am replacing. This is clamped to the end keys and = used as a guide. The strap locates where the notch will end up all in a = perfect row. Something always seems to happen with my router O:((=20 The file is just a little narrower or smaller than the width of the = sharp gap and smooth on the edges so that it can not over cut. Joe Goss imatunr@srvinet.com www.mothergoosetools.com From: Farrell=20 To: Pianotech=20 Sent: Tuesday, November 04, 2003 1:02 PM Subject: Re: Wanted Acu-tuner -3 BTW, what is a notching file? Terry Farrell ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/2f/e5/dc/d1/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC