Yamaha hammers

Erwinspiano@aol.com Erwinspiano@aol.com
Thu, 6 Nov 2003 10:42:55 EST


---------------------- multipart/alternative attachment
In a message dated 11/6/2003 6:04:04 AM Pacific Standard Time, A440A@aol.com 
writes:
>   The hammers are so hard that if you begin at the upper shoulder, the 
> tension in them will tear them apart after a while. 
> Regards,  
> Ed Foote RPT 
      Hi Ed
       And Yamaha builds these hammers this way because...............?
  For all my debt of professional gratitude due Yamaha & for all there 
ingenius wonderful pianos I can't figure this & have never heard an explanation. 
Soundboard that vibrate freely DO NOT require hammers O stone. Still don't get it 
in Modesto.--Dale

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/69/d3/dd/d4/attachment.htm

---------------------- multipart/alternative attachment--

This PTG archive page provided courtesy of Moy Piano Service, LLC