Robertson fastener bits

[Marcel Carey]

I often use my tuning tip extractor. It seems to fit some of these
screws.

Marcel Carey, RPT
Sherbrooke, QC

> -----Original Message-----
> From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On
> Behalf Of J Patrick Draine
> Sent: 30 septembre, 2003 14:29
> To: Pianotech
> Subject: Robertson fastener bits
>
>
> Dear List,
> What's the best source for Robertson bits that will fit
> plate screws
> (for a miserable "Grand" spinet if you must know)? It looks
> to be about
> half a centimeter square.
> Thanks,
> Patrick Draine
> Billerica, MA
>
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives
>