Corte asks: << Let's forget about pitch raising for a bit. I'd like to hear from tuners who claim they can fine tune a piano is less than an hour. What exactly are you doing to shave off the time (assuming quality work is being done)? Are you using some sort of efficient muting pattern? I admit I probably spend too much time moving mutes around. >> Greetings, A fine tuning in 1 hour is simple if the piano is already at pitch. I use one mute, a SAT, and a hammer. The majority of time in a tuning is spent making decisions. That is where you will save the most time. I don't even listen to the note as I pull it sharp. I then make all tuning movements downward to the desired pitch. This way, I don't practice but one movement. Doing ALL the tuning by pushing the lever down gets one pretty consistant in a hurry. If it is a little bit flat, I don't work around it, I simply yank it sharp by 5 or 6 cents and try again. It is faster that way and you avoid problems with jumpy pins. Regards Ed Foote RPT (and it only takes 15 minutes with the SAT to bring a piano to pitch.)
This PTG archive page provided courtesy of Moy Piano Service, LLC