No Pain Square Grand Tuning Lever

Richard Brekne Richard.Brekne@grieg.uib.no
Thu, 30 Oct 2003 09:08:53 +0100


Cute... a Square'd tuning hammer for a Square pianer... and a shamless
plug for Verituner :)

Cheers
RicB

Farrell wrote:
> 
> Below are two photos of my square grand tuning solution. Double ended
> oval tuning tips are set at 90 degrees to one another. A real back
> saver. It's easiest to stand while tuning - just so you can see the
> tuning pins - but this pretty much eliminates any leaning.
> 
> Terry Farrell
> 
> Photos:
> 
> https://www.moypiano.com/ptg/files/attachments/4f/69/9f/5f/SSCN0340.JPG
> 
> https://www.moypiano.com/ptg/files/attachments/c4/e5/af/6e/SSCN0341.JPG
> 
> Alternate:
> 
> http://tinyurl.com/sxzk
> 
> http://tinyurl.com/sxzq
> _______________________________________________
> pianotech list info: https://www.moypiano.com/resources/#archives

-- 
Richard Brekne
RPT, N.P.T.F.
UiB, Bergen, Norway
mailto:rbrekne@broadpark.no
http://home.broadpark.no/~rbrekne/ricmain.html
http://www.hf.uib.no/grieg/personer/cv_RB.html

This PTG archive page provided courtesy of Moy Piano Service, LLC