---------------------- multipart/alternative attachment Richard, I use 5/16". I've never repaired a piano with that much separation. In any case, I use big clamps to pull it together, then the bolts to hold it there, along with epoxy. Regards, Clyde Hollinger Richard Strang wrote: > Thanks for the info, Terry. I have to go make that very repair to a > piano shortly and was contemplating whether or not to lower the pitch > first. It this case, the separation is about 1/2" in the bass and > about 1/4" in the treble. Those pesky little termites are in there, > too. I think they are causing the problem. They are not in the > pinblock, though, so the piano is in tune, though 200 cents flat. I > was also wondering what size bolts to use, 1/4", 3/8"? What do you > recommend?Thanks. ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/f0/1d/ae/4b/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC