2004-December Archives by Date
Starting: Wed Dec 1 00:28:54 2004
Ending: Fri Dec 31 21:57:15 2004
Messages: 1503
- Key Recovering Shops
richard.ucci@att.net
- impact technique(s)
gordon stelter
- My old way of removing keybushings
gordon stelter
- Key Recovering Shops
gordon stelter
- Key Recovering Shops
Greg Newell
- Key Recovering Shops
Tom Driscoll
- polish
Carl Teplitski
- polish
Cy Shuster
- damper problem (probably just stupidity on my part)
Tvak@aol.com
- old Kimball brass flange rail/damper lever removal
Tvak@aol.com
- damper problem (probably just stupidity on my part)
ANRPiano@aol.com
- old Kimball brass flange rail/damper lever removal
ANRPiano@aol.com
- Pitch Raising Techniques
Matthew Todd
- Perfect Pitch discussion
Phil Bondi
- Agraffes
Isaac Sadigursky
- My old way of removing keybushings
Isaac Sadigursky
- My old way of removing keybushings
Ron Nossaman
- damper problem (probably just stupidity on my part)
barr8345@bellsouth.net
- Perfect Pitch discussion
Isaac Sadigursky
- old Kimball brass flange rail/damper lever removal
Thomas Cole
- Back again
Jack Houweling
- damper problem (probably just stupidity on my part)
Isaac Sadigursky
- damper problem (probably just stupidity on my part)
David Ilvedson
- plastic keytop glue
Clyde Hollinger
- plastic keytop glue
John Ross
- My old way of removing keybushings
Quentin Codevelle
- Back again
Quentin Codevelle
- polish
Farrell
- damper problem (probably just stupidity on my part)
Farrell
- Key Recovering Shops
Phil Bondi
- Key Recovering Shops
Keith McGavern
- damper problem (probably just stupidity on my part)
Richard Brekne
- Pitch Raising Techniques
Cy Shuster
- Plain steel bichords
Cy Shuster
- Pitch Raising Techniques
David Love
- plastic keytop glue
Joe And Penny Goss
- plastic keytop glue
Joe Garrett
- damper problem (probably just stupidity on my part)
Paul McCloud
- plastic keytop glue
PianoTek4u@aol.com
- Pitch Raising Techniques
Joe Garrett
- damper problem corrected we hope
D.L. Bullock
- plastic keytop glue
D.L. Bullock
- pitch raising techniques
Ron Koval
- Pitch Raising Techniques
David Ilvedson
- Pitch Raising Techniques
Hechler Family
- Pitch Raising Techniques
Quentin Codevelle
- Heavily played newish Mason gets "strident" too quickly...
gordon stelter
- My old way of removing keybushings
Gevaert Pierre
- Pitch Raising Techniques
A440A@aol.com
- Back again
Richard Brekne
- Pitch Raising Techniques
David Love
- Heavily played newish Mason gets "strident" too quickly...
Richard Brekne
- Key Bushing removal
lgulli2586
- Pitch Raising Techniques
David Love
- Pitch Raising Techniques
David Love
- Pitch Raising Techniques
Richard Brekne
- Pitch Raising Techniques
Farrell
- Pitch Raising Techniques
Richard Brekne
- Pitch Raising Techniques
Farrell
- Pitch Raising Techniques
Farrell
- Back again
David Ilvedson
- Pitch Raising Techniques
Farrell
- Heavily played newish Mason gets "strident" too quickly...
David Ilvedson
- Heavily played newish Mason gets "strident" too quickly...
David Ilvedson
- Pitch Raising Techniques
David Ilvedson
- Pitch Raising Techniques
David Ilvedson
- Key Bushing removal
Richard Cromwell
- Pitch Raising Techniques
Richard Brekne
- pitch raising techniques
David Ilvedson
- Back again
Richard Brekne
- Pitch Raising Techniques
Hechler Family
- Voicing (was Back again)
V T
- Voicing (was Back again)
Richard Brekne
- Pitch Raising Techniques
pianolover 88
- Nose Bolts
Farrell
- Pitch Raising Techniques
Farrell
- Pitch Raising Techniques
Joe Garrett
- plastic keytop glue
richard.ucci@att.net
- Pitch Raising Techniques
Ron Nossaman
- Pitch Raising Techniques
David Ilvedson
- Nose Bolts
David Ilvedson
- Key Bushing removal
David Ilvedson
- Nose Bolts
Michael Spalding
- plastic keytop glue
Avery Todd
- Pitch Raising Techniques
Avery Todd
- Nose Bolts
Farrell
- Flange Screw Torque
Farrell
- Nosebolts
Joe Garrett
- John Broadwood grand
Wesley Hardman
- Pitch Raising Techniques
Avery Todd
- Pitch Raising Techniques
Andrew & Rebeca Anderson
- Nose Bolts
Phillip Ford
- Pitch Raising Techniques
Avery Todd
- John Broadwood grand
Avery Todd
- pitch correction
Don
- Pitch Raising Techniques
Hazen Bannister
- Questions & WARNING--Gimme a break!
Alan
- Pitch Raising Techniques
pianolover 88
- plastic keytop glue
Richard Cromwell
- Questions & WARNING--Gimme a break!
Keith McGavern
- Key Bushing removal
Richard Cromwell
- Questions & WARNING--Gimme a break!
Alan
- Questions & WARNING--Gimme a break!
Ron Nossaman
- Nose Bolts
Joe Garrett
- plastic keytop glue
Isaac Sadigursky
- Nose Bolts
w peterson
- Questions & WARNING--Gimme a break!
Alan
- Questions & WARNING--Gimme a break!
Ron Nossaman
- Nose Bolts
Isaac Sadigursky
- Pitch Raising Techniques
Piannaman@aol.com
- Pitch Raising Techniques
Keith McGavern
- How often do you tune your piano?
Piannaman@aol.com
- Questions & WARNING--Gimme a break!
Dave Davis
- How often do you tune your piano?
Dave Nereson
- How often do you tune your piano?
Keith McGavern
- How often do you tune your piano?
Isaac Sadigursky
- John Broadwood grand
D.L. Bullock
- Pitch Raising Techniques
Dave Nereson
- Pitch Raising Techniques
Richard Brekne
- Questions & WARNING--Gimme a break!
Alan
- Pitch Raising Techniques
Richard Brekne
- Pitch Raising Techniques
Richard Brekne
- How often do you tune your piano?
Phil Bondi
- Nose Bolts
Farrell
- Nose Bolts
Farrell
- How often do you tune your piano?
Farrell
- How often do you tune your piano?
Conrad Hoffsommer
- How often do you tune your piano?
Dean May
- balance rail holes
Don
- How often do you tune your piano?
Michael Spalding
- balance rail holes
Farrell
- Nose Bolts
Ron Nossaman
- Just Wondering
lgulli2586
- Nose Bolts
Ron Nossaman
- Just Wondering
Piannaman@aol.com
- balance rail holes
Piannaman@aol.com
- Pitch Raising Techniques
Cy Shuster
- plastic keytop glue
Alpha88x@aol.com
- Pitch Raising Techniques
Richard Brekne
- Back again
Richard Brekne
- damper problem (probably just stupidity on my part)
Alpha88x@aol.com
- Heavily played newish Mason gets "strident" too quickly...
David Andersen
- Back again
Richard Brekne
- Pitch Raising Techniques
David Andersen
- Pitch Raising Techniques
Alpha88x@aol.com
- How often do you tune your piano?
Alpha88x@aol.com
- How often do you tune your piano?
pianolover 88
- Beats vs cycles vs cents
Alpha88x@aol.com
- Beats vs cycles vs cents
David Love
- FW: Beats vs cycles vs cents
David Love
- plastic keytop glue
Cy Shuster
- Beats vs cycles vs cents
V T
- Beats vs cycles vs cents
Robert Scott
- Beats vs cycles vs cents
Sarah Fox
- How often do you tune your piano?
Bec and John
- Just Wondering
Richard Cromwell
- Perfect Pitch discussion
Bec and John
- Nose Bolts
Nichols
- C. Kemmler & Co
kenneth.gerler@prodigy.net
- Heavily played newish Mason gets "strident" too quickly...
David Ilvedson
- Pitch Raising Techniques
David Ilvedson
- Pitch Raising Techniques
David Ilvedson
- How to avoid breaking a string...
Doug Renz Piano Tuning
- how much CA glue?
Don
- Just Wondering
Isaac Sadigursky
- How to avoid breaking a string...
Thomas Cole
- Perfect Pitch discussion
Richard Brekne
- Just Wondering
David Ilvedson
- How to avoid breaking a string...
Richard Brekne
- Perfect Pitch discussion
David Ilvedson
- Heavily played newish Mason gets "strident" too quickly...
David Andersen
- Perfect pitch and aging (was perfect pitch discussion
Jean Debefve
- Pitch Raising Techniques
Farrell
- Heavily played newish Mason gets "strident" too quickly...
Richard Brekne
- SATll charge time
Phil Bondi
- string breakage
Don
- string breakage warning
Don
- string breakage warning
Conrad Hoffsommer
- John Broadwood grand
Dave Doremus
- Just Wondering
Michael Spalding
- Key Bushing removal
Paul Chick (Earthlink)
- SATll charge time
Paul McCloud
- replacement knuckles
Barbara Richmond
- Stuart Piano
Richard Brekne
- How to avoid breaking a string... another question
Benny L. Tucker
- batteries
Don
- How to avoid breaking a string...
Mike Kurta
- How to avoid breaking a string... another question
pianolover 88
- Key Bushing removal
Gevaert Pierre
- string breakage warning
Farrell
- SATll charge time
Farrell
- balance rail holes
John Ross
- How to avoid breaking a string...
Farrell
- Key Bushing removal
Farrell
- balance rail holes
Farrell
- Perfect Pitch discussion
Bec and John
- endorsed by the Philadelphia Orchestra????
Tvak@aol.com
- Perfect pitch and aging (was perfect pitch discussion
Bec and John
- endorsed by the Philadelphia Orchestra????
Barbara Richmond
- Perfect pitch and aging (was perfect pitch discussion
V T
- endorsed by the Philadelphia Orchestra????
Alan
- endorsed by the Philadelphia Orchestra????
Ron Nossaman
- endorsed by the Philadelphia Orchestra????
Porritt, David
- endorsed by the Philadelphia Orchestra????
Sid Blum
- Perfect pitch and aging (was perfect pitch discussion
Thomas Cole
- replacement knuckles
Jon Page
- How to avoid breaking a string...
Avery Todd
- balance rail holes
William R. Monroe
- endorsed by the Philadelphia Orchestra????
Alan
- replacement knuckles
Dave Mckibben
- replacement knuckles
Dave Mckibben
- replacement knuckles
Erwinspiano@aol.com
- cleaning platic keytops
Dave Mckibben
- replacement knuckles
Avery Todd
- endorsed by the Philadelphia Orchestra????
Cy Shuster
- damper assist spring for spinet
Keith McGavern
- John Broadwood grand
Wesley Hardman
- damper assist spring for spinet
Nichols
- Dampp Chaser and Drills
Matthew Todd
- mystery center pinning
Barbara Richmond
- SATll charge time
David Ilvedson
- endorsed by the Philadelphia Orchestra????
Dean May
- damper assist spring for spinet
David Ilvedson
- batteries
Paul McCloud
- endorsed by the Philadelphia Orchestra????
Michael Spalding
- replacement knuckles
Dave Mckibben
- Just Wondering
Dean May
- mystery center pinning
Ron Nossaman
- replacement knuckles
Dean May
- string breakage
Thomas Cole
- endorsed by the Philadelphia Orchestra????
Isaac Sadigursky
- Key Bushing removal
Isaac Sadigursky
- endorsed by the Philadelphia Orchestra????
Phil Bondi
- Perfect Pitch discussion
Richard Brekne
- mystery center pinning
Richard Brekne
- mystery center pinning
Richard Brekne
- Dampp Chaser and Drills
Dave Nereson
- endorsed by the Philadelphia Orchestra????
Dave Nereson
- Just Wondering
Dave Nereson
- SATll charge time
Phil Ryan
- endorsed by the Philadelphia Orchestra????
Conrad Hoffsommer
- SATll charge time
Phil Bondi
- endorsed by the Philadelphia Orchestra????
James Grebe
- mystery center pinning
Barbara Richmond
- endorsed by the Philadelphia Orchestra????
Tvak@aol.com
- balance rail holes
David Love
- SATll charge time
Phil Ryan
- Dampp Chaser and Drills
Michael Spalding
- mystery center pinning
Richard Brekne
- balance rail holes
Richard Brekne
- Damp Chaser and Drills
Joe Garrett
- Dampp Chaser and Drills
Cy Shuster
- endorsed by the Philadelphia Orchestra????
Alan
- Oblong & Sqare tuning hammer bits
hubert liverman
- endorsed by the Philadelphia Orchestra????
Robin Hufford
- Weber action self-destruction
Michael Spalding
- mystery center pinning
Barbara Richmond
- Looking for Quality Steinway or European Piano
mfarrel2@tampabay.rr.com
- balance rail holes
mfarrel2@tampabay.rr.com
- Dampp Chaser and Drills
Don
- Looking for Quality Steinway or European Piano
JAMES DALLY
- Dampp Chaser and Drills
Don
- Weber action self-destruction
Nichols
- Weber action self-destruction
Avery Todd
- Weber action self-destruction
Phil Frankenberg
- Weber action self-destruction
Horace Greeley
- Dampp Chaser and Drills
Joe And Penny Goss
- Dampp Chaser and Drills
Cy Shuster
- Looking for Quality Steinway or European Piano
BUNKYPIANO@aol.com
- How often do you tune your piano?
Vinny Samarco
- endorsed by the Philadelphia Orchestra????
gordon stelter
- Dampp Chaser and Drills
Richard Cromwell
- Weber action self-destruction (contact info)
Piannaman@aol.com
- SAT11 charge time
Joe Garrett
- oblong/oval tuning hammer tips
Joe Garrett
- Damp Chaser and Drills
Ron Nossaman
- Noisy Action troubleshooting
staff
- Dampp Chaser on side-by-side B's
Don
- plastic keytop glue
Paul Chick (Earthlink)
- Key Bushing removal
Paul Chick (Earthlink)
- Rebushing centers
Barbara Richmond
- damper problem solution:stupidity, in part
Tvak@aol.com
- oblong/oval tuning hammer tips
hubert liverman
- damper problem solution:stupidity, in part
Phil Bondi
- Hole in Soundboard for Damp Chaser cord
Don
- damper problem solution:stupidity, in part
PianoTek4u@aol.com
- Noisy Action troubleshooting
Paul McCloud
- Weber action self-destruction (contact info)
Michael Spalding
- Fwd: Just Wondering
Erwinspiano@aol.com
- endorsed by the Philadelphia Orchestra????
Alpha88x@aol.com
- endorsed by the Philadelphia Orchestra????
Alpha88x@aol.com
- endorsed by the Philadelphia Orchestra????
Alpha88x@aol.com
- Weber action self-destruction
Alpha88x@aol.com
- damper problem solution:stupidity, in part
Alpha88x@aol.com
- Heavily played newish Mason gets "strident" too quickly...
David Ilvedson
- Noisy Action troubleshooting
tom driscoll
- Hole in Soundboard for Damp Chaser cord
Joe Garrett
- Rebushing flanges
Joe Garrett
- Rebushing centers
staff
- endorsed by the Philadelphia Orchestra????
Porritt, David
- Dampp Chaser on side-by-side B's
Kent Swafford
- Hole in Soundboard for Damp Chaser cord
Ron Nossaman
- Dampp Chaser on side-by-side B's
Ron Nossaman
- Hole in Soundboard for Damp Chaser cord
Joe Garrett
- Rippen Grand comments?
William J Morton
- Philadelpha Orchestra???
JWyatt1492@aol.com
- Rebushing centers
Barbara Richmond
- Hole in Soundboard for Damp Chaser cord
Ron Nossaman
- Hole in Soundboard for Damp Chaser cord
Andrew & Rebeca Anderson
- Hole in Soundboard for Damp Chaser cord
Ron Nossaman
- Hole in Soundboard for Damp Chaser cord
Erwinspiano@aol.com
- Super Glue on polyester finish
Auraltuner@aol.com
- Super Glue on polyester finish
Paul McCloud
- Rebushing centers
Avery Todd
- Hole in Soundboard for Damp Chaser cord
Ron Nossaman
- Noisy Action troubleshooting
Avery Todd
- Hole in Soundboard for Damp Chaser cord
Richard Brekne
- Hole in Soundboard for Damp Chaser cord
Andrew & Rebeca Anderson
- Dampp Chaser on side-by-side B's
Greg Newell
- Hole in Soundboard for Damp Chaser cord
Greg Newell
- Dampp Chaser and Drills
Dean May
- Hole in Soundboard for Damp Chaser cord
Dean May
- Super Glue on polyester finish
Dean May
- Dampp Chaser on side-by-side B's
Dean May
- Super Glue on polyester finish
Jon Page
- Was Holy soundboard
Alan Forsyth
- Super Glue on polyester finish
Mike Bratcher
- Super Glue on polyester finish
Paul McCloud
- Super Glue on polyester finish
David Ilvedson
- Hole in Soundboard for Damp Chaser cord
David Andersen
- Heavily played newish Mason gets "strident" too quickly...
David Andersen
- Rebushing centers
Robin Hufford
- Hole in Soundboard for Damp Chaser cord
Richard Brekne
- Heavily played newish Mason gets "strident" too quickly...
David Ilvedson
- appraisal, Yamaha Discklavier
Clyde Hollinger
- Philadelpha Orchestra???
Alpha88x@aol.com
- Philadelpha Orchestra???/Jack Wyatt
Tvak@aol.com
- Heavily played newish Mason gets "strident" too quickly...
David Andersen
- Rebushing centers
Robin Hufford
- August Forester Grand
Terry
- August Forester Grand
B214cm@aol.com
- August Forester Grand
Gevaert Pierre
- August Forester Grand
Richard Brekne
- mystery center pinning
Barbara Richmond
- Rippen Grand comments?
Gevaert Pierre
- mystery center pinning
Richard Brekne
- Regulating A Square Grand
Patrick C. Poulson
- mystery center pinning
Barbara Richmond
- Regulating A Square Grand
Jon Page
- August Forester Grand
Clyde Hollinger
- Regulating A Square Grand
Patrick C. Poulson
- Regulating A Square Grand
David Ilvedson
- Regulating A Square Grand
Don Mannino
- Regulating A Square Grand
Patrick C. Poulson
- Andre's punchings
David Ilvedson
- Regulating A Square Grand
Ron Nossaman
- Regulating A Square Grand
Richard Brekne
- Regulating A Square Grand
Richard Brekne
- Andre's punchings
Richard Brekne
- Regulating A Square Grand
David Ilvedson
- Cruise Ship Piano Tuner
Terry
- Square Grand Rocker Capstan Regulating
Philip Jamison
- Super Glue on polyester finish
Paul Chick (Earthlink)
- Super Glue on polyester finish
Conrad Hoffsommer
- Cruise Ship Piano Tuner
Keith McGavern
- Super Glue on polyester finish
Paul Chick (Earthlink)
- Regulating A Square Grand
Joe Garrett
- Cruise Ship Piano Tuner
David Ilvedson
- Regulating A Square Grand
Joe Garrett
- punchings
Erwinspiano@aol.com
- Regulating A Square Grand
Joe Garrett
- Regulating A Square Grand
D.L. Bullock
- Live Chat Reminder
John Musselwhite
- punchings
Stéphane Collin
- Rippen Grand comments?
William J Morton
- punchings
Richard Brekne
- Regulating A Square Grand
Joe Garrett
- Cruise Ship Piano Tuner
Alan Forsyth
- Plate Removal
Richard Cromwell
- Cruise Ship Piano Tuner
Terry
- Cruise Ship Piano Tuner
Terry
- Plate Removal
Terry
- Plate Removal
gordon stelter
- Plate Removal
Mike Kurta
- Plate Removal
David Renaud
- Regulating A Square Grand
David Ilvedson
- Plate Removal
Thomas Cole
- Help with a price, please.
Phil Bondi
- Cruise Ship Piano Tuner
Stéphane Collin
- Pulling Plates
Joe Garrett
- 1865 Style 2 S&S
Joe Garrett
- Pulling Plates
John Ross
- Kawai/Yamaha New Uprights
Don
- Kawai/Yamaha New Uprights
Don
- Peterson Auto-strobe 490ST
Don
- 1865 Style 2 S&S
Terry
- Help with a price, please.
Terry
- 1865 Style 2 S&S
Phil Bondi
- Kawai/Yamaha New Uprights
Terry
- Kawai/Yamaha New Uprights
James Grebe
- 1865 Style 2 S&S
Richard Brekne
- 1865 Style 2 S&S
Richard Brekne
- Kawai/Yamaha New Uprights
Richard Brekne
- 1865 Style 2 S&S
Ron Nossaman
- Pulling Plates
Dean May
- Kawai/Yamaha New Uprights
Terry
- Kawai/Yamaha New Uprights
Dave Davis
- Kawai/Yamaha New Uprights
David Andersen
- 1865 Style 2 S&S
Erwinspiano@aol.com
- SV: Kawai/Yamaha New Uprights
Kjell Sverre Fardal
- Peterson Auto-strobe 490ST
mps@usol.com
- 1865 Style 2 S&S
Delwin D Fandrich
- 1865 Style 2 S&S
Stéphane Collin
- Peterson Auto-strobe 490ST
Porritt, David
- Peterson Auto-strobe 490ST
w peterson
- Peterson Auto-strobe 490ST
Andrew & Rebeca Anderson
- 1865 Style 2 S&S
Avery Todd
- Pulling Plates
Greg Newell
- 1865 Style 2 S&S
Richard Brekne
- Pulling Plates
Terry
- Peterson Auto-strobe 490ST
Richard Brekne
- 1865 Style 2 S&S
Richard Brekne
- 1865 Style 2 S&S
Stéphane Collin
- tuner needed
richard.ucci@att.net
- Pulling Plates
Joe And Penny Goss
- 1865 Style 2 S&S
Erwinspiano@aol.com
- 1865 Style 2 S&S
Erwinspiano@aol.com
- Pulling Plates
gordon stelter
- Tchaika Pianos
David Love
- 1865 Style 2 S&S
Erwinspiano@aol.com
- Ballistol
Greg Newell
- Ballistol
Joe And Penny Goss
- Pulling Plates
CChristus
- Ballistol
Greg Newell
- Ballistol
Horace Greeley
- Ballistol
Greg Newell
- Ballistol
Joe And Penny Goss
- Tchaika Pianos
Isaac Sadigursky
- Kawai/Yamaha New Uprights
Piannaman@aol.com
- Pulling Plates
John Musselwhite
- Ballistol
Greg Newell
- Pulling Plates
Terry
- Pulling Plates
staff
- Pulling Plates
John Ross
- Pulling Plates
Conrad Hoffsommer
- Pulling Plates
Terry
- Pulling plates/rim protection
CChristus
- Tchaika Pianos
David Love
- Ballistol
Richard Brekne
- Tchaika Pianos
Richard Brekne
- Pulling Plates
gordon stelter
- Pulling Plates
gordon stelter
- Pulling Plates
gordon stelter
- Rippen Grand comments?
Gevaert Pierre
- 1865 Style 2 S&S
Gevaert Pierre
- Pulling Plates (speed?)
Robin Stevens
- Pulling Plates
Greg Newell
- Pulling plates/rim protection
Greg Newell
- Rebushing centers/mystery center pinning
Don
- Rebushing centers/mystery center pinning
Barbara Richmond
- Rebushing centers/mystery center pinning
Horace Greeley
- Rebuild estimates/bridge pins
Bob Hull
- Rebuild estimates/bridge pins
David Love
- Key bushing Removal: Addendum
David Love
- Pulling Plates (speed?)
Thomas Cole
- Rebuild estimates/bridge pins
Bob Hull
- Rebushing centers/mystery center pinning
Richard Brekne
- Rebushing centers/mystery center pinning
Richard Brekne
- Virtual shop design tool
staff
- Pulling plates/rim protection
staff
- Rebuild estimates/bridge pins
Terry
- Rebuild estimates/bridge pins
David Love
- Rebuild estimates/bridge pins
Porritt, David
- Rebuild estimates/bridge pins
Joe Garrett
- Key bushing Removal: Addendum
David Ilvedson
- Rebushing centers/mystery center pinning
Robin Hufford
- Rebushing centers/mystery center pinning
Robin Hufford
- Nolan Zeringue
JWyatt1492@aol.com
- Rebushing centers/mystery center pinning
Robin Hufford
- To Jack Wyatt was RE: Nolan Zeringue
Alan
- Rebuild estimates/bridge pins
Richard Brekne
- Key bushing Removal: Addendum
David Love
- Rebuild estimates/bridge pins
David Love
- To Jack Wyatt was RE: Nolan Zeringue
JWyatt1492@aol.com
- How to travel upright hammers with a continuous flange pin?
Cy Shuster
- Scorch mark on inside of kneeboard: DC heater bar?
Cy Shuster
- Key bushing Removal: Addendum
Chris Gregg
- How to travel upright hammers with a continuous flange pin?
tom driscoll
- How to travel upright hammers with a continuous flange pin?
Avery Todd
- Rebuild estimates/bridge pins
Porritt, David
- How to travel upright hammers with a continuous flange pin?
Cy Shuster
- Scorch mark on inside of kneeboard: DC heater bar?
Richard Cromwell
- How to travel upright hammers with a continuous flange pin?
lgulli2586
- Scorch mark on inside of kneeboard: DC heater bar?
Cy Shuster
- How to travel upright hammers with a continuous flange pin?
Quentin Codevelle
- Rebuild estimates/bridge pins
Richard Brekne
- Noisy Action troubleshooting
Brad Smith, RPT
- Rebushing centers/mystery center pinning
Barbara Richmond
- Noisy Action troubleshooting
Dean May
- Rebuild estimates/bridge pins
David Love
- Rebuild estimates/bridge pins
Erwinspiano@aol.com
- Polyester Refinish
Terry
- Rebushing centers/mystery center pinning
Robin Hufford
- How to travel upright hammers with a continuous flange pin?
Gevaert Pierre
- Rebushing centers/mystery center pinning
David Ilvedson
- Rebuild estimates/bridge pins
Richard Brekne
- New-ish Chickering Origins
Dave Davis
- New-ish Chickering Origins
James Grebe
- New-ish Chickering Origins
Dave Davis
- New-ish Chickering Origins
Mike Bratcher
- New-ish Chickering Origins
Avery Todd
- Rippen Grand comments?
William J Morton
- New-ish Chickering Origins
Bill Jeffreys
- Rebushing centers/mystery center pinning
Don
- Polyester Refinish
Kerry Cooper
- Rebushing centers/mystery center pinning
Barbara Richmond
- broken tuning pin
Ron & Lorene Shiflet
- broken tuning pin
A440A@aol.com
- Rebushing centers/mystery center pinning
David Ilvedson
- broken tuning pin - conclusion
Ron & Lorene Shiflet
- Job opening at Ball State University
Ron Berry
- New-ish Chickering Origins
James Grebe
- New-ish Chickering Origins
Richard Brekne
- New-ish Chickering Origins
Porritt, David
- Key bushing Removal: Addendum
Terry
- New-ish Chickering Origins
Allan Gilreath
- Sunday Thoughts
David Andersen
- Sunday Thoughts
Horace Greeley
- Rebushing centers/mystery center pinning
Robin Hufford
- New-ish Chickering Origins
Dave Davis
- Rebushing centers/mystery center pinning
Robin Hufford
- Rebushing centers/mystery center pinning
David Ilvedson
- Sunday Thoughts
Barbara Richmond
- Sunday Thoughts
David Ilvedson
- Sunday Thoughts
Erwinspiano@aol.com
- Sunday Thoughts
Roy Czekay
- Rebushing centers/mystery center pinning
Ron & Lorene Shiflet
- Sunday Thoughts
D.L. Bullock
- broken tuning pin
Isaac Sadigursky
- Mensurix 5 (Scaling Program) Update
Bernhard Stopper
- Sunday Thoughts
Piannaman@aol.com
- The old extension shaft finally gives out--any leads on new one?
Piannaman@aol.com
- The old extension shaft finally gives out--any leads on new one?
Joe And Penny Goss
- The old extension shaft finally gives out--any leads on new one?
Joe And Penny Goss
- Square Nut Driver
Terry
- The old extension shaft finally gives out--any leads on new one?
Carl Meyer
- Square Nut Driver
Joe And Penny Goss
- do not call list
FRANCES HELMS
- Square Nut Driver
Patrick C. Poulson
- do not call list
Richard Oliver Snelson
- do not call list
Richard Oliver Snelson
- do not call list
gordon stelter
- Square Nut Drivers
Joe Garrett
- do not call list
Robert Scott
- The old extension shaft finally gives out--any leads on
new one?
Horace Greeley
- do not call list
Barbara Richmond
- Jumpy pins in new Kawai
Paul Mulik
- Jumpy pins in new Kawai
Ron & Lorene Shiflet
- broken tuning pin
Ron & Lorene Shiflet
- Jumpy pins in new Kawai
David Ilvedson
- Jumpy pins in new Kawai
Porritt, David
- Jumpy pins in new Kawai
Keith McGavern
- Help with "bad" tuning...need help
Don
- Jumpy pins in new Kawai
Richard Brekne
- Jumpy pins in new Kawai
Richard Brekne
- Jumpy pins in new Kawai
tom driscoll
- Jumpy pins in new Kawai
Avery Todd
- Jumpy pins in new Kawai
Avery Todd
- Square Nut Driver
Nichols
- Jumpy pins in new Kawai
Nichols
- Square Nut Driver
Dave Bunch
- Help with "bad" tuning...need help
Doug Renz Piano Tuning
- Help with "bad" tuning...need help
James Grebe
- Help with "bad" tuning...need help
Richard Oliver Snelson
- Subject: Help with "bad" tuning...need help
Kurt
- Help with "bad" tuning...need help
Bec and John
- Help with "bad" tuning...need help
James Grebe
- Help with "bad" tuning...need help
Nichols
- Square Nut Driver
Terry
- Help with "bad" tuning...need help
Terry
- Help with "bad" tuning...need help
Terry
- Help with "bad" tuning...need help
Terry
- Help with "bad" tuning...need help
David Love
- installing damper guide rail
Tvak@aol.com
- Help with "bad" tuning...need help
David Ilvedson
- Help with "bad" tuning...need help
David Ilvedson
- Help with "bad" tuning...need help
David Ilvedson
- Subject: Help with "bad" tuning...need help
Richard Oliver Snelson
- installing damper guide rail
Michael Spalding
- The old extension shaft finally gives out--any leads on new one?
Piannaman@aol.com
- installing damper guide rail
David Love
- Help with "bad" tuning...need help
Piannaman@aol.com
- Jumpy pins in new Kawai
Piannaman@aol.com
- CA'ing pins
Hechler Family
- Help with "bad" tuning...need help
James Grebe
- Help with "bad" tuning...need help
James Grebe
- Jumpy pins in new Kawai
wjstuner@juno.com
- Help with "bad" tuning...need help
Dean May
- CA'ing pins
Dean May
- CA'ing pins
Joe And Penny Goss
- Subject: Help with "bad" tuning...need help
Dean May
- CA'ing pins
Mark Dierauf
- fumes waS CA'ing pins
jason kanter
- fumes waS CA'ing pins
Joe And Penny Goss
- Help with "bad" tuning...need help
Don
- Jumpy pins in new Kawai
Joe Garrett
- CA'ing pins
Ron & Lorene Shiflet
- Live Chat Reminder
John Musselwhite
- Help with bad tuning
Kenny Finlayson
- Help with "bad" tuning...need help
Richard Brekne
- Help with "bad" tuning...need help
Richard Brekne
- Help with "bad" tuning...need help
Richard Brekne
- CA'ing pins
Keith McGavern
- CA'ing pins
Dean May
- Help with "bad" tuning...need help
James Grebe
- Help with "bad" tuning...need help
James Grebe
- Help with "bad" tuning...need help
James Grebe
- half step / whole step (was Re: Help with "bad" tuning...need help
Keith McGavern
- Help with "bad" tuning...need help
Richard Brekne
- Jumpy pins in new Kawai
Avery Todd
- Jumpy pins in new Kawai
Avery Todd
- Help with "bad" tuning...need help
ANRPiano@aol.com
- Help with "bad" tuning...need help
Avery Todd
- Help with "bad" tuning...need help
Joe And Penny Goss
- Help with "bad" tuning...need help
Richard Brekne
- Help with "bad" tuning...need help
Avery Todd
- Scratched Yamaha CFIII Plate
Terry Beckingham
- Help with "bad" g...need help
pianolover 88
- Subject: Helps with "bad" tuning
pianolover 88
- Help with "bad" tuning...need help
David Ilvedson
- Help with "bad" tuning...need help
James Grebe
- Help with "bad" tuning...need help
James Grebe
- Kawai Pin Blocks
Ron & Lorene Shiflet
- tuning stability
Ron & Lorene Shiflet
- Kawai Pin Blocks
Jeannie Grassi
- half step / whole step (was Re: Help with "bad" tuning...need
help
Sarah Fox
- plate screws?
Bec and John
- Kawai Pin Blocks
Ron Nossaman
- Scratched Yamaha CFIII Plate
V T
- Scratched Yamaha CFIII Plate
Jon Page
- Help with "bad" tuning...need help
David Ilvedson
- Help with "bad" tuning...need help
David Ilvedson
- Cents: was help with bad tuning...
Richard Brekne
- Subject: Helps with "bad" tuning
Dean May
- Piano Appraisal Checklists?
Don
- Help with bad tuning
Terry
- Help with "bad" tuning...need help
Terry
- Help with "bad" tuning...need help
Terry
- Help with "bad" tuning...need help
Terry
- Help with "bad" tuning...need help
Terry
- Help with "bad" tuning...need help
Terry
- Help with bad tuning
Phil Bondi
- Help with bad tuning
Terry
- Jumpy pins in new Kawai
wjstuner@juno.com
- Help with "bad" tuning...need help
Dean May
- Help with bad tuning
Dean May
- Fwd: test
Conrad Hoffsommer
- test
Doug Renz Piano Tuning
- Scratched Yamaha CFIII Plate
RWyatt8547@aol.com
- Help with "bad" tuning...need help
Stéphane Collin
- Piano Appraisal Checklists?
mps@usol.com
- Kawai grand info
Zoran Grujic
- Scratched Yamaha CFIII Plate
Terry Beckingham
- grand action problem
Scott Helms
- Plate Screws?
Joe Garrett
- Kawai pin blocks
FRANCES HELMS
- Kawai Pin Blocks
Joe Garrett
- test response
Alan
- Help with "bad" tuning...need help
Don
- Piano Appraisal Checklists?
Don
- Kawai grand info
Keith McGavern
- grand action problem
William R. Monroe
- Help with "bad" tuning...need help
Richard Brekne
- Help with "bad" tuning...need help
Richard Brekne
- Help with bad tuning
Richard Brekne
- Help with bad tuning
Richard Brekne
- Help with "bad" tuning...need help
Richard Brekne
- Help with bad tuning
Richard Brekne
- grand action problem
Richard Brekne
- grand action problem
Jon Page
- grand action problem
Quentin Codevelle
- Help with bad tuning
Dean May
- Help with "bad" tuning...need help
Dean May
- grand action problem
Jon Page
- Customer Locations
Doug Renz Piano Tuning
- bad tuning update
Doug Renz Piano Tuning
- Help with "bad" tuning...need help
James Grebe
- Help with "bad" tuning...need help
Avery Todd
- bad tuning update
Terry
- Customer Locations
Terry
- Piano Appraisal Checklists?
Terry
- Customer Locations
Cy Shuster
- Fw: Piano Appraisal Checklists?
Terry
- Help with "bad" tuning...need help
Terry
- grand action problem
Sarah Fox
- grand action problem
David Ilvedson
- Cents: was help with bad tuning...
David Ilvedson
- Help with bad tuning
David Ilvedson
- grand action problem
Terry
- Cents: was help with bad tuning...
John Ross
- grand action problem
Jon Page
- Help with "bad" tuning...need help
William R. Monroe
- online scheduling
tlneely
- Cents: was help with bad tuning...
Terry
- high to go over pitch
Aps322@aol.com
- Help with "bad" tuning...need help
Terry
- high to go over pitch
Terry
- Cents: was help with bad tuning...
Dean May
- Cents: was help with bad tuning...
John Ross
- Help with "bad" tuning...need help
Andrew & Rebeca Anderson
- Help with "bad" tuning...need help
lgulli2586
- high to go over pitch
Andrew & Rebeca Anderson
- Help with "bad" tuning...need help
Andrew & Rebeca Anderson
- online scheduling
David Ilvedson
- Cents: was help with bad tuning...
David Ilvedson
- Customer Locations
Piannaman@aol.com
- Subject: Helps with "bad" tuning
David Ilvedson
- Cents: was help with bad tuning...
David Ilvedson
- Cents: was help with bad tuning...Ric B. Eastern Scale?
Piannaman@aol.com
- Cents: was help with bad tuning...Ric B. Eastern Scale?
David Ilvedson
- online scheduling
Brad Smith, RPT
- Kawai grand info
Don Mannino
- bobbling hammers on Yamaha upright (P-22)
Sspeev@aol.com
- bobbling hammers on Yamaha upright (P-22)
Keith McGavern
- bobbling hammers on Yamaha upright (P-22)
Piannaman@aol.com
- Kawai Pin Blocks
Don Mannino
- Kawai 600, was Re: Kawai Pin Blocks
Piannaman@aol.com
- Help with "bad" tuning...need help
Richard Brekne
- Help with "bad" tuning...need help
Richard Brekne
- Help with "bad" tuning...need help
Don
- lost customers
Don
- grand action problem
Richard Brekne
- Cents: was help with bad tuning...
Richard Brekne
- Help with bad tuning
Richard Brekne
- high to go over pitch
Richard Brekne
- high to go over pitch
David Ilvedson
- Cents: was help with bad tuning...Ric B. Eastern Scale?
Richard Brekne
- high to go over pitch
Richard Brekne
- Established Memory
kennyfin@jetstream.net
- Customer Locations
Mike Kurta
- bad tuning update
Phil Bondi
- PTG Exam Issue -- vertical action model modifications
Dave Nereson
- Help with "bad" tuning...need help
James Grebe
- Help with "bad" tuning...need help
James Grebe
- high to go over pitch
James Grebe
- Help with "bad" tuning...need help
James Grebe
- Cents: was help with bad tuning...
Terry
- Help with "bad" tuning...need help
Terry
- Cents: was help with bad tuning...
Terry
- lost customers
Aps322@aol.com
- bobbling hammers on Yamaha upright (P-22)
Aps322@aol.com
- high to go over pitch
Aps322@aol.com
- Help with "bad" tuning...need help
Richard Brekne
- [CAUT] Cat Damage
Jon Page
- bobbling hammers on Yamaha upright (P-22)
tom driscoll
- lost customers
Phil Bondi
- Help with "bad" tuning...need help
Richard Brekne
- Cents: was help with bad tuning...
Richard Brekne
- Help with "bad" tuning...need help
Piannaman@aol.com
- bobbling hammers on Yamaha upright (P-22)
Richard Brekne
- Help with "bad" tuning...need help
Phil Bondi
- lost customers
Piannaman@aol.com
- Cents: was help with bad tuning...
Dean May
- Help with "bad" tuning...need help
Richard Brekne
- Followup on the bobbling hammers in Yamaha
Sspeev@aol.com
- Cents: was help with bad tuning...
Richard Brekne
- short question on (15-20 year old) Weber console
Sspeev@aol.com
- Help with "bad" tuning...need help
Phil Bondi
- lost customers
tom driscoll
- grand action problem
Scott Helms
- Cents: was help with bad tuning...
Dean May
- replacing brass flange rails
D.L. Bullock
- Tuning Appointment cancellations
Doug Renz Piano Tuning
- Cents: was help with bad tuning...Ric B. Eastern Scale?
Avery Todd
- Cents: was help with bad tuning...Ric B. Eastern Scale?
David Ilvedson
- Followup on the bobbling hammers in Yamaha
Avery Todd
- replacing brass flange rails
Thomas Cole
- high to go over pitch
Avery Todd
- Help with "bad" tuning...need help
James Grebe
- Help with "bad" tuning...need help
James Grebe
- Cents: was help with bad tuning...Ric B. Eastern Scale?
Stéphane Collin
- short question on (15-20 year old) Weber console
Avery Todd
- Pictures
Avery Todd
- Aural Pitch Raise
Matthew Todd
- Pictures
Keith McGavern
- Unauthorized mis-quote
Delwin D Fandrich
- lost customers
J Patrick Draine
- Help with "bad" tuning...need help
Alan
- Tuning Appointment cancellations
Keith McGavern
- Customer Locations
Keith McGavern
- short question on (15-20 year old) Weber console
Alan
- Followup on the bobbling hammers in Yamaha
Keith McGavern
- Help with "bad" tuning...need help
Richard Brekne
- grand action problem
Richard Brekne
- Tuning Appointment cancellations
Richard Brekne
- Cents: was help with bad tuning...Ric B. Eastern Scale?
Richard Brekne
- Followup on the bobbling hammers in Yamaha
Richard Brekne
- Help with "bad" tuning...need help
Richard Brekne
- Unauthorized mis-quote
Richard Brekne
- Established Memory
Richard Brekne
- Help with "bad" tuning...need help
David Ilvedson
- fallboard flop
Don
- Help with "bad" tuning...need help
Carl Meyer
- Help with "bad" tuning...need help
Avery Todd
- Cents: was help with bad tuning...Ric B. Eastern Scale?
Avery Todd
- Unauthorized mis-quote
Avery Todd
- [Files] Re: lost customers (Modified by Kent Swafford)
Avery Todd
- Post to moderated list
Avery Todd
- Unauthorized mis-quote
Delwin D Fandrich
- Unauthorized mis-quote
Avery Todd
- Help with "bad" tuning...need help
James Grebe
- Post to moderated list
Andrew Rudoff
- Help with "bad" tuning...need help
James Grebe
- grand action problem
Scott Helms
- Help with "bad" tuning...need help
Richard Brekne
- Help with "bad" tuning...need help
Richard Brekne
- fallboard flop
Hazen Bannister
- Pianos for heavy use?
Cy Shuster
- Pinblock screw record
Erwinspiano@aol.com
- grand action problem
Sarah Fox
- Pinblock screw record
Ron Nossaman
- Help with "bad" tuning...need help
Dean May
- Post to moderated list
Phil Bondi
- bandwidth
J Patrick Draine
- Help with "bad" tuning...need help
David Ilvedson
- Cents: was help with bad tuning...Ric B. Eastern Scale?
David Ilvedson
- Tuning Appointment cancellations
Mike Kurta
- bandwidth OVERLOAD!
Robin Stevens
- fallboard flop
Alan
- h
Hazen Bannister
- piano software for mac OSX
Hazen Bannister
- replacing brass flange rails
Terry
- Tuning Appointment cancellations
Terry
- lost customers
Terry
- h
Will Wickham
- Pianos for heavy use?
Terry
- Tuning Appoint. cancellations
pianolover 88
- fallboard flop
Hazen Bannister
- Funny one ... Was fallboard flop
Alan
- piano software for mac OSX
Will Wickham
- Tuning Appointment cancellations
Isaac Sadigursky
- fallboard flop
Isaac Sadigursky
- Tuning Appointment cancellations
pianolover 88
- Tuning Appointment cancellations
Isaac Sadigursky
- bobbling hammers....etc.
Joe Garrett
- bandwidth OVERLOAD!
Dean May
- Ric's contribution
Robin Stevens
- Post to moderated list
Avery Todd
- fallboard flop
James Grebe
- Tuning Appointment cancellations
James Grebe
- Tuning Appointment cancellations
James Grebe
- Tuning Appointment cancellations
Terry
- "Nightmeyer"
Piannaman@aol.com
- "Nightmeyer"
Doug Renz Piano Tuning
- Tuning Appointment cancellations
Piannaman@aol.com
- Aural Pitch Raise
David Love
- Key leveling device
Phillip Ford
- Ric's contribution
Quentin Codevelle
- Plastic action parts
Phillip Ford
- Help with "bad" tuning...need help
pianolover 88
- Tuning Appointment cancellations
pianolover 88
- Schaff longer new upright spring!
Don
- Ric's contribution
Avery Todd
- Help with "bad" tuning...need help
Sarah Fox
- Ric's contribution
Quentin Codevelle
- Help with "bad" tuning...need help
Sarah Fox
- Cents: was help with bad tuning...Ric B. Eastern Scale?
Robin Hufford
- Key leveling device
Thomas Cole
- shop tip trivia--trimming shanks
Don
- Aural Pitch Raise
David Love
- Sunday Thoughts
Alpha88x@aol.com
- Help with "bad" tuning...need help
Robin Hufford
- Help with "bad" tuning...need help
James Grebe
- Ric's contribution
Erwinspiano@aol.com
- grand action problem
Richard Brekne
- Pinblock screw record
Richard Brekne
- bandwidth
Richard Brekne
- Cents: was help with bad tuning...Ric B. Eastern Scale?
Richard Brekne
- Schaff longer new upright spring!
Alpha88x@aol.com
- Ric's contribution
Richard Brekne
- Ric's contribution
Quentin Codevelle
- Aural Pitch Raise
Richard Brekne
- shop tip trivia--trimming shanks
Don
- shop tip trivia--trimming shanks
Don
- Dale's contributiosns, was Ric's contribution
Richard Brekne
- Schaff longer new upright spring!
Richard Brekne
- Schaff longer new jack spring!
Alpha88x@aol.com
- Schaff longer new upright spring!
Alpha88x@aol.com
- Plastic action parts
Elwood Doss, Jr.
- Key leveling device
Phillip Ford
- Schaff longer new upright spring!
Richard Brekne
- Schaff longer new upright spring!
Alpha88x@aol.com
- Plastic action parts
Cy Shuster
- shop tip trivia--trimming shanks
Erwinspiano@aol.com
- bobbling hammers....etc.
Aps322@aol.com
- Help with "bad" tuning...need help
pianolover 88
- shop tip trivia--trimming shanks
Roy Czekay
- shop tip trivia--trimming shanks
Cy Shuster
- shop tip trivia--trimming shanks
Erwinspiano@aol.com
- established memory
Kenny Finlayson
- bobbling hammers....etc.
Keith McGavern
- bobbling hammers....etc.
Avery Todd
- shop tip trivia--trimming shanks
A440A@aol.com
- bobbling hammers....etc.
Avery Todd
- bobbling hammers....etc.
Dean May
- bobbling hammers....etc.
Kent Swafford
- shop tip trivia--trimming shanks
David Love
- bobbling hammers....etc.
tom driscoll
- bobbling hammers....etc.
Ron Nossaman
- bobbling hammers....etc.
Joe And Penny Goss
- shop tip trivia--trimming shanks
David Ilvedson
- established memory
David Ilvedson
- [Files] Morris upright Bass bridge images (Modified by Kent Swafford)
tom driscoll
- Key leveling device
Thomas Cole
- Schaff longer new upright spring!
Don
- Samick damper rod pins
Don
- shop tip trivia--trimming shanks
Terry
- Plastic action parts
Don
- Aural Pitch Raise
Dave Nereson
- established memory
Terry
- Schaff longer new upright spring!
Terry
- Heeees baaaack... Was: RE: test response
Conrad Hoffsommer
- Aural Pitch Raise
Phil Bondi
- Plastic action parts
Phil Bondi
- Key levelling device
Kerry Cooper
- thinking ahead by looking behind
James Grebe
- Which Whippen?
Arlie Rauch
- Plastic action parts
MarinoPiano@aol.com
- Samick damper rod pins
Arlie Rauch
- shop tip trivia--trimming shanks
David Love
- Center pin friction (was Re: Schaff spring)
Phillip Ford
- Key levelling device
Phillip Ford
- Schaff longer new upright spring!
Richard Brekne
- Heeees baaaack... Was: RE: test response
Richard Brekne
- Plastic action parts
Richard Brekne
- Plastic action parts
Elwood Doss, Jr.
- Heeees baaaack... Was: RE: test response
Dean May
- Fwd: shop tip trivia--triming shanks
Erwinspiano@aol.com
- Plastic action parts
tom driscoll
- Shank weight; was trimming tips
David Andersen
- [Files] Morris upright Bass bridge images (Modified by Kent
Swafford)
Terry
- Center pin friction (was Re: Schaff spring)
Terry
- Which Whippen?
Terry
- Plastic action parts
Bec and John
- Plastic action parts
tom driscoll
- Key Recovering Shops (PIANOPHILE in Quebec)
Byron Quam
- torque
Dave Mckibben
- Key levelling device
John Ross
- torque
John Ross
- regulation problems in Aeolian era M and H 50"
Piannaman@aol.com
- torque/ bobbling thread.
Richard Brekne
- shop tip trivia--triming shanks
Jon Page
- torque
Richard Brekne
- regulation problems in Aeolian era M and H 50"
Richard Brekne
- Plastic action parts
Cy Shuster
- Plastic action parts
Carl Meyer
- torque
Keith McGavern
- Plastic action parts
John Ross
- torque
Richard Brekne
- regulation problems in Aeolian era M and H 50"
Keith McGavern
- Center pin friction (was Re: Schaff spring)
Keith McGavern
- Plastic action parts
Elwood Doss, Jr.
- Center pin friction (was Re: Schaff spring)
Richard Brekne
- For Queen and Country
Richard Brekne
- Relying on tools versus feel (was Re: torque
Keith McGavern
- Hammer flange versus jack flange gram resistance (was Re: torque
Keith McGavern
- Center pin friction (was Re: Schaff spring)
Keith McGavern
- Plastic action parts
Avery Todd
- For Queen and Country
Avery Todd
- Keytop Recovering.
George Bartlett
- Plastic action parts
Carl Meyer
- For Queen and Country
Carl Meyer
- regulation problems in Aeolian era M and H 50"
Piannaman@aol.com
- For Queen and Country
David Love
- Key levelling device - APTTA
Kerry Cooper
- Aural Pitch Raise
David Ilvedson
- established memory
Andrew & Rebeca Anderson
- New Hobart M. Cable
Mike Bratcher
- [Files] Morris upright Bass bridge images (Modified by
KentSwafford)
Mike Bratcher
- regulation problems in Aeolian era M and H 50"
Michael Spalding
- Aural Pitch Raise
Elwood Doss, Jr.
- New Hobart M. Cable
Phil Bondi
- regulation problems in Aeolian era M and H 50"
antares
- Kawai Pin Blocks
Don
- Action Model
Don
- For Queen and Country
Richard Brekne
- regulation problems in Aeolian era M and H 50"
Richard Brekne
- established memory
Richard Brekne
- Action Model
Alpha88x@aol.com
- established memory
Stéphane Collin
- plastic keytop glue
Alpha88x@aol.com
- regulation problems in Aeolian era M and H 50"
Piannaman@aol.com
- regulation problems in Aeolian era M and H 50"
Piannaman@aol.com
- Noisy Jacks
Sspeev@aol.com
- Noisy Jacks
tom driscoll
- Noisy Jacks
Sspeev@aol.com
- For Queen and Country
Don
- Measuring center pin resistance
Phillip Ford
- Key levelling device - APTTA
Phillip Ford
- Noisy Jacks
John Ross
- Noisy Jacks
tom driscoll
- established memory
Dean May
- The proof is where? sort of OT
Michael Spalding
- Noisy Jacks
Dave Mckibben
- Plastic action parts
Don Mannino
- Noisy Jacks
Joe And Penny Goss
- Noisy Jacks
Joe And Penny Goss
- Plastic action parts
Don Mannino
- Measuring center pin resistance
Stéphane Collin
- regulation problems in Aeolian era M and H 50"
antares
- Plastic action parts
Ron Nossaman
- Action Model
hubert liverman
- Action Model
Don Mannino
- Action Model
hubert liverman
- Kawai Pin Blocks
Robin Hufford
- For Queen and Country
Andrew Rudoff
- Action Model
David Ilvedson
- plastic keytop glue
David Vanderhoofven
- Plastic action parts
David Ilvedson
- Noisy Jacks
Piannaman@aol.com
- Measuring center pin resistance
Richard Brekne
- Plastic action parts
Richard Brekne
- For Queen and Country
Richard Brekne
- Signing your full name
Joe Garrett
- established memory
Richard Brekne
- Plastic action parts
Avery Todd
- regulation problems in Aeolian era M and H 50"
Keith McGavern
- Plastic action parts
Don
- Noisy Jacks
Keith McGavern
- Which Whippen?
Keith McGavern
- regulation problems in Aeolian era M and H 50"
Piannaman@aol.com
- signing your name to posts comments
Joe Garrett
- Which Whippen?
Joe And Penny Goss
- Noisy Jacks
Joe And Penny Goss
- signing your name to posts comments
Dean May
- signing your name to posts comments (private)
Keith McGavern
- regulation problems in Aeolian era M and H 50"
David Ilvedson
- signing your name to posts comments (private)
David Ilvedson
- signing your name to posts comments (private)
Keith McGavern
- Noisy Jacks
JWyatt1492@aol.com
- Signing your full name
JWyatt1492@aol.com
- Measuring center pin resistance
Phillip Ford
- signing your name to posts comments (private)
David Ilvedson
- Kawai Pin Blocks
Don Mannino
- Plastic action parts
Richard Brekne
- signing your name to posts comments
Richard Brekne
- The proof is where? sort of OT
Richard Brekne
- regulation problems in Aeolian era M and H 50"
Richard Brekne
- Measuring center pin resistance
Stéphane Collin
- Plastic action parts
Terry
- Plastic action parts
Joe And Penny Goss
- regulation problems in Aeolian era M and H 50"
Piannaman@aol.com
- another test to ignore
Conrad Hoffsommer
- Kawai Pin Blocks
Robin Hufford
- another test to ignore
Alan
- Kawai Pin Blocks
Robin Hufford
- another test to ignore, this thyme frum hoam
Conrad Hoffsommer
- signing your name to posts comments
Avery Todd
- Plastic action parts
Bec and John
- Plastic action parts
Richard Brekne
- signing your name to posts comments
Richard Brekne
- regulation problems in Aeolian era M and H 50"
Richard Brekne
- regulation problems in Aeolian era M and H 50"
Piannaman@aol.com
- regulation problems in Aeolian era M and H 50"
Robin Stevens
- Plastic action parts
Don
- Plastic action parts
Don
- Plastic action parts
MarinoPiano@aol.com
- Year End
lgulli2586
- Plastic action parts
Terry
- signing your name to posts comments
Dean May
- Plastic action parts
Piannaman@aol.com
- Plastic action parts
Piannaman@aol.com
- Plastic action parts
Terry
- Mason&Hamlin --- 50 "
JWyatt1492@aol.com
- Plastic action parts
David Love
- Plastic action parts
MarinoPiano@aol.com
- ABS actions Kawai Verticals
MarinoPiano@aol.com
- Plastic action parts
Donald Mannino
- Mason&Hamlin --- 50 "
Richard Brekne
- Plastic action parts
Richard Brekne
- Pepsi Pinblock Dope?
Don
- Steinway Agraffes
Arthur Chickering
- Steinway Agraffes
tom driscoll
- Steinway Agraffes
A440A@aol.com
- Pepsi Pinblock Dope?
Don
- signing your name to posts comments
Avery Todd
- Steinway Agraffes
Richard Cromwell
- Pepsi Pinblock Dope?
Richard Cromwell
- Plastic action parts
Avery Todd
- Skil 3400 table saw
Avery Todd
- Pepsi Pinblock Dope?
justpianos@our.net.au
- Steinway Agraffes
Erwinspiano@aol.com
- Pepsi Pinblock Dope?
Richard Cromwell
- Steinway Agraffes
Isaac Sadigursky
- square grand tuning: fun
Tvak@aol.com
- Steinway Agraffes
Ron Nossaman
- square grand tuning: fun
Isaac Sadigursky
- Pepsi Pinblock Dope?
Terry Beckingham
- square grand tuning: fun
David Ilvedson
- Mason&Hamlin --- 50 "
Piannaman@aol.com
- I Think I'll Eat My Words, Attention, Jim Coleman.
Vinny Samarco
- square grand tuning: fun
Piannaman@aol.com
- Action Model
Dave Nereson
- square grand tuning: fun
Conrad Hoffsommer
- square grand tuning: fun
Jon Page
- square grand tuning: fun
Terry
- Steinway Agraffes
A440A@aol.com
- Steinway Agraffes
Ron Nossaman
- Pepsi Pinblock Dope?
Dean May
- Mason&Hamlin --- 50 "
JWyatt1492@aol.com
- ideas wanted for PTG meeting
Don
- Steinway Agraffes
Nichols
- Steinway Agraffes
A440A@aol.com
- Plastic action parts: Darkness
MarinoPiano@aol.com
- Joe Garrett's tool belt
Gps Graham
- Steinway Agraffes
Ron Nossaman
- Steinway Agraffes
tom driscoll
- Steinway Agraffes
Nichols
- Pepsi Pinblock Dope?
Cy Shuster
- SawStop safety table saw
Cy Shuster
- SawStop safety table saw
James Grebe
- Steinway Agraffes
Ron Nossaman
- SawStop safety table saw
Ron Nossaman
- SawStop safety table saw
Cy Shuster
- I Think I'll Eat My Words, Attention, Jim Coleman.
Carl Teplitski
- Year End
Alpha88x@aol.com
- SawStop safety table saw
Ron Nossaman
- ideas wanted for PTG meeting
Alpha88x@aol.com
- ideas wanted for PTG meeting
Richard Oliver Snelson
- SawStop safety table saw
Greg Newell
- SawStop safety table saw
Cy Shuster
- Damppchaser withouts Beams
Don
- Plastic action parts: Darkness
Avery Todd
- Rebushing centers/mystery center pinning
Richard Brekne
- SawStop safety table saw
James Grebe
- SawStop safety table saw
Mike Bratcher
- Upright Player
Avery Todd
- square grand tuning: fun
John Ross
- Mason&Hamlin --- 50 "
Richard Brekne
- Pepsi Pinblock Dope?
John Ross
- square grand tuning: fun
Richard Brekne
- Rebushing centers/mystery center pinning
Barbara Richmond
- Bore lengths
Richard Brekne
- Upright Player
John Ross
- Bore lengths
David Ilvedson
- square grand tuning: fun
David Ilvedson
- Bore lengths
Richard Brekne
- Damppchaser withouts Beams
Patrick C. Poulson
- Pepsi Pinblock Dope?
justpianos@our.net.au
- Upright Player
Hechler Family
- Damppchaser withouts Beams
Bob Hull
- SawStop safety table saw
Sarah Fox
- square grand tuning: fun
Bob Hull
- SawStop safety table saw
David Ilvedson
- SawStop safety table saw
Greg Newell
- Mason&Hamlin --- 50 "
pianotech51@earthlink.net
- square grand tuning: fun & $$
Jim Kinnear
- Bore lengths
Overs Pianos
- square grand tuning: fun & $$
Bob Hull
- SawStop safety table saw
Sarah Fox
- Bore lengths
A440A@aol.com
- SawStop safety table saw
Greg Newell
- Bore lengths
Richard Brekne
- Bore lengths
Richard Brekne
- Upright Player
Avery Todd
- Upright Player
Terry
- SawStop safety table saw
James Grebe
- Mason&Hamlin --- 50 "
J Patrick Draine
- Mason&Hamlin --- 50 "
Michael Spalding
- SawStop safety table saw
Terry
- square grand tuning: fun
Terry
- Third Bridge
Terry
- Mason&Hamlin --- 50 "
JWyatt1492@aol.com
- SawStop safety table saw
Erwinspiano@aol.com
- SawStop safety table saw
Greg Newell
- Third Bridge
Erwinspiano@aol.com
- SawStop safety table saw
Dean May
- SawStop safety table saw
Greg Newell
- Plastic Flange Bushings
Joe Garrett
- Mason&Hamlin --- 50 "
Lesher, Trent J.
- Third Bridge
Delwin D Fandrich
- Mason&Hamlin --- 50 "
Lesher, Trent J.
- Third Bridge
Ron Nossaman
- Plastic Flange Bushings
Donald Mannino
- SawStop safety table saw
James Grebe
- SawStop safety table saw
Horace Greeley
- Measuring center pin resistance
Phillip Ford
- Hickman Grand Action
Phillip Ford
- SawStop safety table saw
Greg Newell
- SawStop safety table saw
Greg Newell
- Mason&Hamlin --- 50 "
Michael Spalding
- Merry Christmas
Brian Lawson
- Mason&Hamlin --- 50 "
Lesher, Trent J.
- Piano Finder Fee
Terry
- insurance and cars and safety
Don
- Piano Finder Fee
Don
- Bad Student Piano Insight
Terry
- SawStop safety table saw
James Grebe
- Bad Student Piano Insight
Richard Oliver Snelson
- SawStop safety table saw
Sarah Fox
- Piano Finder Fee
Nichols
- Piano Finder Fee
Sarah Fox
- SawStop safety table saw
Nichols
- SawStop safety table saw
Erwinspiano@aol.com
- SawStop safety table saw
Erwinspiano@aol.com
- Piano Finder Fee
Paul McCloud
- Bad Student Piano Insight
Vinny Samarco
- Piano Finder Fee
Erwinspiano@aol.com
- Hickman Grand Action
JWyatt1492@aol.com
- SawStop safety table saw
Allan Gilreath
- Greetings
Ajay Mistry
- Square grand tuning fun
Joe Garrett
- Plastic Flange Bushings
Joe Garrett
- Piano Finder Fee
Stéphane Collin
- Bad Student Piano Insight
Ron Nossaman
- Third Bridge
Calin Tantareanu
- Bad Student Piano Insight
D.L. Bullock
- Piano Finder Fee
David Love
- Third Bridge
Ron Nossaman
- greetings
Stéphane Collin
- Square grand tuning fun
JWyatt1492@aol.com
- SawStop safety table saw
J Patrick Draine
- was ----------RE: Mason&Hamlin --- 50 "
Ron Nossaman
- Bad Student Piano Insight
Alan Forsyth
- Third Bridge
Mark Dierauf
- SawStop safety table saw
Greg Newell
- Piano Finder Fee
Andrew Olson
- Third Bridge
James Grebe
- Third Bridge
Ron Nossaman
- Fwd: Square grand tuning fun
JWyatt1492@aol.com
- Square grand tuning fun
David Ilvedson
- Piano Finder Fee
David Ilvedson
- Piano Finder Fee
David Andersen
- Third Bridge
Dave Nereson
- why sell maintenance the customer won't notice?
Dave Nereson
- Bad Student Piano Insight
Dave Nereson
- Bad Student Piano Insight
Terry
- why sell maintenance the customer won't notice?
Jim Kinnear
- why sell maintenance the customer won't notice?
Porritt, David
- Square grand tuning fun
Tvak@aol.com
- Year End
Tvak@aol.com
- why sell maintenance the customer won't notice?
Terry
- why sell maintenance the customer won't notice?
Terry
- Year End
ANRPiano@aol.com
- why sell maintenance the customer won't notice?
Robert J Russell
- Bad Student Piano Insight
Ron Nossaman
- why sell maintenance the customer won't notice?
Terry
- why sell maintenance the customer won't notice?
ANRPiano@aol.com
- Bad Student Piano Insight
Terry
- why sell maintenance the customer won't notice?
Erwinspiano@aol.com
- Joe Garrett's tool belt
Joe Garrett
- Steinway aggraffes
Joe Garrett
- Bad Student Piano Insight
Vinny Samarco
- Bad Student Piano Insight
Vinny Samarco
- Bad Student Piano Insight
Vinny Samarco
- square grand tuning: fun
Joe Garrett
- Year End
hubert liverman
- Year End
ANRPiano@aol.com
- Year End
Terry
- Year End
James Grebe
- Year End
James Grebe
- why sell maintenance the customer won't notice?
pianolover 88
- Year End
Robert J Russell
- Year End
Elwood Doss, Jr.
- Seiler Grands magnetic repitition
Don
- digital?
Don
- Year End
Alan Forsyth
- Year End
Cy Shuster
- Year End
Thomas Cole
- digital?
Don
- Year End
James Grebe
- Year End
Stéphane Collin
- Year End
James Grebe
- digital?
James Grebe
- Bad Student Piano Insight
David Ilvedson
- Seiler Grands magnetic repitition
Alpha88x@aol.com
- Steinway aggraffes
w peterson
- Steinway aggraffes
w peterson
- Year End
J. Stanley Ryberg
- Year End
Hazen Bannister
- Seiler Grands magnetic repitition
Don Mannino
- digital?
Don Mannino
- digital?
pianolover 88
- Bad Student Piano Insight
Thomas Cole
- digital?
Vinny Samarco
- digital?
Don
- Year End
James Grebe
- digital?
James Grebe
- digital?
James Grebe
- digital?
James Grebe
- digital?
Hechler Family
- digital?
Tvak@aol.com
- Steinway aggraffes
Terry
- digital?
Stéphane Collin
- Steinway aggraffes
Erwinspiano@aol.com
- Square grand tuning: fun
Joe Garrett
- Square Grand tuning: fun
Joe Garrett
- Digital?
Joe Garrett
- Steinway aggraffes
Joe Garrett
- Digital?
Stéphane Collin
- Year End
J. Stanley Ryberg
- digital?
Nichols
- Steinway aggraffes
w peterson
- digital?
Barbara Richmond
- digital?
pianolover 88
- digital?
Nichols
- digital?
Robin Stevens
- Bad Student Piano Insight
Avery Todd
- Steinway aggraffes
Carl Meyer
- digital
Don
- Digital?
Joe Garrett
- why sell maintenance the customer won't notice?
Avery Todd
- why sell maintenance the customer won't notice?
Avery Todd
- digital
Nichols
- digital
Ron Nossaman
- Bad Student Piano Insight
David Andersen
- digital
Vinny Samarco
- Digital?
Stéphane Collin
- digital?
James Grebe
- Square Grand tuning: fun
Terry
- why sell maintenance the customer won't notice?
Porritt, David
- Steinway aggraffes
Terry
- Steinway aggraffes
Terry
- Steinway aggraffes
Ron Nossaman
- digital
Don
- digital
Nichols
- Digital
Joe Garrett
- Squre grand tuning: fun
Joe Garrett
- tool of the year
J Patrick Draine
- digital
Don
- digital?
pianolover 88
- Action Model
hubert liverman
- Year End
hubert liverman
- tool of the year
David Ilvedson
- digital
David Ilvedson
- tool of the year
Terry
- Roland digital
Jim Kinnear
- Roland digital
gordon stelter
- Roland digital
Alan
- MOOG (Cow with hairlip?) Pianobar
Alan
- Steinway aggraffes
Joe Garrett
- digital?
James Grebe
- digital
Vinny Samarco
- digital?
pianolover 88
- Jenco Celeste in NYC
Gps Graham
- regluing veneer
J Patrick Draine
- Year End
Erwinspiano@aol.com
- regluing veneer
gordon stelter
- Steinway aggraffes
gordon stelter
- Year End
David Ilvedson
- regluing veneer
David Ilvedson
- Roland digital
Peter Joris
- Roland digital
Richard Brekne
- why sell maintenance the customer won't notice?
Dave Nereson
- Roland digital
Peter Joris
- regluing veneer
James Grebe
- software tuners
Don
- Year End
Dean May
- why sell maintenance the customer won't notice?
Richard Brekne
- regluing veneer
J Patrick Draine
- regluing veneer
Chris Gregg
- Roland digital
Hazen Bannister
- Year End
Erwinspiano@aol.com
- Year End
Thomas Cole
- Roland EP 9
Terry
- digital
David Renaud
- regluing veneer
James Grebe
- regluing veneer
Terry
- regluing veneer
Avery Todd
- regluing veneer
J Patrick Draine
- Roland EP 9
George Bartlett
- Year End
Dean May
- Two strange pianos today
Cy Shuster
- regluing veneer
Erwinspiano@aol.com
- Year End
Avery Todd
- regluing veneer
Roy Czekay
- Year End
Thomas Cole
- Some Changes, and Thanks
Yardarm103669107@aol.com
- replacing a Bluthner action
rkd0930@comcast.net
- replacing a Bluthner action
David Ilvedson
- replacing a Bluthner action
David Ilvedson
- regluing veneer
Erwinspiano@aol.com
- digital
Hazen Bannister
- Two strange pianos today
Piannaman@aol.com
- replacing a Bluthner action
Don
- shank bushings
Don
- replacing a Bluthner action
Terry
- regluing veneer
James Grebe
- regluing veneer
tom driscoll
- Year End
lgulli2586
- regluing veneer
Jon Page
- replacing a Bluthner action
Don
- was year end/now low end pianos
Tvak@aol.com
- Tuning Levers
Matthew
- Tuning Levers
Terry
- was year end/now low end pianos
Terry
- was year end/now low end pianos
Tvak@aol.com
- shank bushings
Barbara Richmond
- shank bushings
Ron Nossaman
- was year end/now low end pianos
Erwinspiano@aol.com
- regluing veneer
Avery Todd
- shank bushings
Barbara Richmond
- Tuning Levers
Erwinspiano@aol.com
- Tuning Levers
antares
- replacing a Bluthner action
antares
- Tuning Levers
Cy Shuster
- Tuning Levers
joel jones
- Tuning Levers
Quentin Codevelle
- cat box odor!
Alpha88x@aol.com
- cat box odor!
Quentin Codevelle
- "Bird cage" piano
Alpha88x@aol.com
- cat box odor!
John Ross
- "Bird cage" piano
John Ross
- Tuning Levers
Ron Nossaman
- Waves
Richard Brekne
- "Bird cage" piano
antares
- replacing a Bluthner action
Richard Brekne
- cat box odor!
Andrew Olson
- replacing a Bluthner action
Richard Brekne
- shank bushings
Richard Brekne
- cat box odor!
John Ross
- "Bird cage" piano
Terry
- cat box odor!
David Ilvedson
- Tuning Levers
John Musselwhite
- replacing a Bluthner action
Don
- Tuning Levers
Cy Shuster
- replacing a Bluthner action
Avery Todd
- Tuning Levers
Ron Nossaman
- Seeking year made of P.A. Starck - SN #202617
Hechler Family
- Printer
Porritt, David
- Printer
Greg Newell
- Seeking year made of P.A. Starck - SN #202617
Phil Bondi
- Seeking year made of P.A. Starck - SN #202617
Hechler Family
- 3/8 inch hex shaft for Hale Hammer?
Don
- Tuning Levers
Joe And Penny Goss
- replacing a Bluthner action
Nichols
- Tuning Levers
Nichols
- Tuning Levers & Convention Warning
Alan
- "Bird cage" piano
Alan
- Tuning Levers
Erwinspiano@aol.com
- Waves
Erwinspiano@aol.com
- Some Changes, and Thanks
Erwinspiano@aol.com
- "Bird cage" piano
pianolover 88
- replacing a Bluthner action
Richard Brekne
- Feeling Dumb, Whatzis?
Alan
- replacing a Bluthner action
Richard Brekne
- replacing a Bluthner action
Avery Todd
- Feeling Dumb, Whatzis?
Conrad Hoffsommer
- Feeling Dumb, Whatzis?
Conrad Hoffsommer
- Feeling Dumb, Whatzis?
Alan
- Feeling Dumb, Whatzis?
Conrad Hoffsommer
- Tuning Levers/Contacting Yamaha
Bob Hull
- "Bird cage" piano
D.L. Bullock
- Waves
Bob Hull
- Tuning Levers
Piannaman@aol.com
- 3/8 inch hex shaft for Hale Hammer?
Piannaman@aol.com
- Waves
Piannaman@aol.com
- 3/8 inch hex shaft for Hale Hammer?
Joe And Penny Goss
- digital?
Carl Teplitski
- 3/8 inch hex shaft for Hale Hammer?
Piannaman@aol.com
- was year end/now low end pianos
David Andersen
- Seeking year made of P.A. Starck - SN #202617
Phil Bondi
- low end pianos
Conrad Hoffsommer
- Feeling Dumb, Whatzis?
Jon Page
- Seeking year made of P.A. Starck - SN #202617
tom driscoll
- Seeking year made of P.A. Starck - SN #202617
Hechler Family
- low end pianos
Piannaman@aol.com
- low(est) end pianos
pianolover 88
- Recycled technology-cutoff bar
Erwinspiano@aol.com
- low(est) end pianos
Steve Grattan
- Cable spinet
James Grebe
- Happy New Year
David Andersen
- low(est) end pianos
Erwinspiano@aol.com
- Namm show
Hazen Bannister
- Cable spinet
Alan
- replacing a Bluthner action
Richard Brekne
- Happy New Year
Richard Brekne
- Cable spinet
Phil Bondi
- address request
Phil Bondi
- address request
Mike Kurta
- Namm show
pianolover 88
- address request
Phil Bondi
- Recycled technology-cutoff bar
Terry
- Namm show
Hazen Bannister
- Namm show
Nichols
- Feeling Dumb, Whatzis?
Joe Garrett
- Magnetic Rocker Capstan?
Joe Garrett
- was year end/now low end pianos
Thomas Cole
- Happy New Year
Cy Shuster
- Magnetic Rocker Capstan?
Richard Brekne
- Happy New Year--out with the old, in with the new!
Piannaman@aol.com
- address request
Mike Kurta
- Happy New Year
Bob Hull
- Feeling dumb
lgulli2586
- Recycled technology-cutoff bar
Erwinspiano@aol.com
- Recycled technology-cutoff bar
Erwinspiano@aol.com
- address request
Avery Todd
- Happy New Year--out with the old, in with the new!
Erwinspiano@aol.com
- Happy New Year
antares
- Happy New Year
Dean May
- Happy New Year
Hazen Bannister
- Odd Bechstein
Don
- Odd Bechstein
William R. Monroe
Last message date:
Fri Dec 31 21:57:15 2004
Archived on: Fri Dec 31 21:29:52 2004
This archive was generated by
Pipermail 0.08 (Mailman edition).
This PTG archive page provided courtesy of
Moy Piano Service, LLC