Hi Phillip: That's a really odd thread. I can see why it's so expensive. I'm not even sure how your machinist plans to make it since a 1/4-27 UNS tap would be very hard to find. Are you sure it's not 1/4-28? This is a standard UNF thread and you might be able to find a nut like this from McMaster-Carr or even a hardware store. If the nut isn't very thick, you might even be able to get away with a 1/4-28 nut on a 1/4-27 stud without much interference. Don A. Gilmore Mechanical Engineer Kansas City ----- Original Message ----- From: "mortier" <mortier@netreach.net> To: <pianotech@ptg.org> Sent: Tuesday, February 03, 2004 10:06 AM Subject: Steinway Action Nut > Anyone have a Steinway upright action nut to spare? I have a > 1912 model missing one. My machinist wants $90 to make it! > It's a simple, concave brass nut with 1/4" X 27 thread. > > Philip Jamison > West Chester, PA > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC