Me too! Any way you can simply post them to the list or the net? It sounds like several here would be interested. - Mark -----Original Message----- From: Ted Simmons [mailto:tsimmons4@cfl.rr.com] Sent: Thursday, February 05, 2004 6:41 PM To: Pianotech Subject: Re: Yamaha repair Tom, I have such a job coming up. I would also be interested in your handout. Ted Simmons > From: John Ross <jrpiano@win.eastlink.ca> > Reply-To: Pianotech <pianotech@ptg.org> > Date: Thu, 05 Feb 2004 18:44:04 -0400 > To: tcole@cruzio.com, Pianotech <pianotech@ptg.org> > Subject: Re: Yamaha repair > > Hi Tom, > Would it be possible to scan the handout? I would be interested, in a copy. > Thank you. > Best regards, > John M. Ross > Windsor, Nova Scotia, Canada > jrpiano@win.eastlink.ca > ----- Original Message ----- > From: "Thomas Cole" <tcole@cruzio.com> > To: <davidlovepianos@earthlink.net>; "Pianotech" <pianotech@ptg.org> > Sent: Thursday, February 05, 2004 6:28 PM > Subject: Re: Yamaha repair > > >> David, >> >> I recently delivered technicals to the Santa Cruz and Santa Clara >> chapters on this subject. I can send you the handout if you'd like. The >> methods we use can cut the shop time in half. >> >> Tom Cole >> Santa Cruz >> >> David Love wrote: >> >>> I've got customer with a Yamaha console that needs all the thread that >>> holds the hammer return spring replaced (they're all breaking). I'm > open >>> to suggestions about an expeditious way to go about this. >>> >>> David Love >>> davidlovepianos@earthlink.net >>> >>> >>> >>> _______________________________________________ >>> pianotech list info: https://www.moypiano.com/resources/#archives >>> >>> >>> >>> >> >> _______________________________________________ >> pianotech list info: https://www.moypiano.com/resources/#archives >> > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC