No, it's not even a full perimeter plate. Thanks Carl ----- Original Message ----- From: "Calin Tantareanu" <dnu@fx.ro> To: "Pianotech" <pianotech@ptg.org> Sent: Sunday, February 15, 2004 1:17 AM Subject: Re: Viennese > If it's a late Viennese piano, with a acst iron frame, then it should be > able to be tuned at a440 without any rescaling. Of course, the strings might > break if they are old, but I think the piano can stand the tension. I used > to have a late Viennese acation Boesendorfer, and it worked at a440 without > problems. > > > Calin Tantareanu > ---------------------------------------------------- > http://calintantareanu.tripod.com > ---------------------------------------------------- > > ----- Original Message ----- > From: "Carl Meyer" <cmpiano@comcast.net> > To: <pianotech@ptg.org> > Sent: Sunday, February 15, 2004 12:29 AM > Subject: Viennese > > > > I've agreed to restring a Viennese action grand piano. I've forgotten the > > brand, the atlas doesn't list it anyway. Of course I told him it wasn't > > worth doing etc etc, but he wants it done. Bought it at auction and wants > > to take lessons. Yada yada yada. > > > > I'd like to rescale it to allow it to be tuned to a440. If anyone can > tell > > me what pitch they were tuned at originally I can use pscale to scale it > so > > that the total tension will be the same at 440 as it was at what ever the > > original pitch was. I did this for an old Collard & Collard recently. > > Worked out okay. > > > > It's now at two half steps flat of 440. > > > > Anybody know what the typical pitch was for these or must I use a diving > > rod? > > > > Thanks > > > > Carl Meyer Ptg assoc > > Santa Clara, Ca. > > > > _______________________________________________ > > pianotech list info: https://www.moypiano.com/resources/#archives > > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC