Bill, You may want to think about removing some wood from the inside of the hammer tail using a small drum sander in a drill press. And/or regulate the dampers to lift later in the key stroke. Jerry Gravina, RPT Babylon, NY At 04:24 PM 02/16/2004 -0800, you wrote: >I have a clients' grand action, an old Gulbransen. Someone has put on new >hammers, and the other parts are in good condition, the ivory keyboard is >in exceptionally good condition. He has carpel tunnel, and is complaining >about the "heavy" touch. I played on it, and it is heavier than I would >like myself. I measured the downweight with gram weights, and it averages >55 grams +. I took the job, but need some advice. There does not seem to >be excess friction in any of the action parts. It is my opinion that the >hammers are too heavy. They were installed several years ago, but look >almost new. They have a "fuzzy" look, that makes them look as if they are >"right out of the box." They may not have ever been filed. The tails looks >as if they have been barely shaped for the back checks, not the long curve >that is typical. I can see lots of wood that can be taken off. I bought a >gram scale so that I could maybe achieve some consistency in the wood >removal. My neig! hbor has a band saw, and I have a disk sander. I think I >could do the wood removal, measuring the weight as I go. Having never done >this job before, what advice can you give me? > >Bill Yick, Rpt > > >Do you Yahoo!? >Yahoo! Finance: ><http://us.rd.yahoo.com/evt=22055/*http://taxes.yahoo.com/filing.html>Get >your refund fast by filing online
This PTG archive page provided courtesy of Moy Piano Service, LLC