You can email Thomas Malone at Baldwin (they make the current Wurlitzer): Thomas.malone@gibson.com . I don't know if they still have the parts you need. Paul McCloud San Diego -----Original Message----- From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of Fred Brown III Sent: Wednesday, January 21, 2004 5:50 AM To: pianotech Subject: wurlitzer action brackets I worked on Wurlitzer grand yesterday that the hammer line had fallen to the point of losing about a 3rd of the key travel. When I pulled the stack off to do a course adjust of the capstans(2 1/2 turns each) one of the brackets fell to pieces on the keys. Both it and the other interior bracket seem to have been epoxied together by a preceding tech. I need to find replacements for these(no I'm not going to try and do a better job of gluing). Does anyone know who would have made this piano probably in the late 80's to early 90's. My guess is Samick but I thought that I would check with you guys before proceeding. thanks for any help in advance Fred Brown RPT ATL GA _______________________________________________ pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC