I ran into this same problem, on the same type/age piano. I tightened everything...so I thought. I thought the sound was coming from the action brackets buzzing on the studs. It turned out to be a buzz comeing from the lower plate bolts right in that section. There were 2 that were very loose. Mike Bratcher ----- Original Message ----- From: <richard.ucci@att.net> To: <pianotech@ptg.org> Sent: Tuesday, January 27, 2004 8:09 PM Subject: baldwin buzz > Hi People, > > Tuned a Baldwin spinet ca. 70's today. Nasty buzzzz and rattle at e,f and f# > 3. Checked soundboard -no cracks; tightened soundboard buttons in back; > nothing interfering with strings; bridge pins tight and not out of place; > ribs good; nothing stuck in back by soundboard; pushing on bridge and > soundboard didn't do anything. > > I could use some help on this one. > > Thanks, > Rick Ucci/Ucci Piano > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC