One thing I forgot to mention, the original pins do go through the block after removal. It seems removing the pins really enlarge the hole... Marcel > -----Original Message----- > From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On > Behalf Of Marcel Carey > Sent: 28 janvier, 2004 10:23 > To: pianotech > Subject: baldwin block reaming > > > Hello list, > > I'm repinning a baldwin M with the multi-hard laminated block. The > original pins were .282 and were REALLY THIGHT. I'd like to put .286 > in there. Knowing this block is super hard, I was wondering how much > smaller I should drill or shouldn't. > > The holes are glazed since the original were so thight. Help will be > appreciated. > > Thanks, > > Marcel Carey, RPT > > > Marcel Carey > Accordeur Technicien > 2852 Dussault > Rock Forest QC J1N 2V6 > (819) 564-0447 > mcpiano@globetrotter.net > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC