I just used some of this stuff, mixed with aniline dye powder, to replace a bit of rim molding on a 1925 grand I am working on. Worked pretty well. Hard to see repair. I would, though, like to hear others' recommendations for such repairs. I am inclined to try the "Tootsie Roll"(TM) type epoxy putty, mixed with dye powder, next time. Thump --- Erwinspiano@aol.com wrote: > List > Ever now & then we require a small amount of quick > drying epoxy for small > jobs, such as reinforcing screw holes or filling a > piece of a bridge patch > that was inadvertently lifted off during notching. > (Yes, it happens) This brand > dries quickly & is approx color of maple, which is > nice. > Also I often find the small screw holes in the > music desk of Steinways to > be woefully insufficient for doing its job of > holding the thing together, > especially in cases where much use ,age & abuse > is/has occured. Keith Roberts > devised a repair in our shop which fills the holes > with the epoxy and leaves > just the tip of a tooth pickin the hole to help > keep the swabbed mixture in > place. He then sprays the screws with a mold > release, Mclube, & inserts the > screws as the epoxy get s about half hard. With the > mold release the screws will > easily back out if needed & the repair is really > strong. > Dale > __________________________________ Do you Yahoo!? Yahoo! Mail - 50x more storage than other providers! http://promotions.yahoo.com/new_mail
This PTG archive page provided courtesy of Moy Piano Service, LLC