This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Greg Newell said: "It was my understanding that the hitch pin used by = Walter is indeed=20 adjustable but the entire pin moves up and down not just the string." Greg Newell Greg, Those are set at the factory and are not easily moved. On a service = issue, for one of the early Walter Grands, I had to come up with a tool = for extracting a couple of those pins. Even with the tool and a whole = lot of grunting and groaning, it was difficult. The job was done, but it = weren't fun. Afterwards, I loaned the tool to the Walters so they could = duplicate it, for their own use. My advice is don't EVEN try to adjust one of those! Best Regards, Joe Garrett, R.P.T. Captain, Tool Police Squares R I ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/c9/53/26/42/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC