This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Thank you all. Excellant word pictures, and I do believe I do see these = pictures. I'll be giving these advice tips a go tonight. Again, many thanks. Gordon Holley ----- Original Message -----=20 From: Gordon Holley=20 To: Pianotech=20 Sent: Monday, July 26, 2004 12:25 PM Subject: Repetition Lever Height List. In regulating a grand with all new wippens, hammers and shanks, = I'm having a problem with determining the correct dimension between the top of the jack and the top of the = repetition lever, in setting the repetition lever height. On the back page of the March 2004 Journal, the Yamaha, Little Red = Schoolhouse, Step 18 of regulation, says that there should be 0.2 mm between the top of the jack and the top of the repetition = lever. And yes, I've read all of the other info provided, but I'm = surely not that great at a tactile sensation with a finger to determine 0.2 mm. =20 And I don't know how to measure the 0.2mm with a gauge in the lever = window. I read some place that this thickness is about the same as a business card, but that doesn't help. Does anyone have a better, step-by-step procedure to follow to set the = lever height? Many thanks in advance Gordon Holley Associate Member Chapter 467, Indiana Goshen, IN ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/fd/4a/fa/b3/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC