---------------------- multipart/alternative attachment I ran into exactly the same thing. Carriage bolts through original screw holes plus two others. Closed up the gap with bar clamps after injecting glue and bolted it back together. It was 1/2 to 5/8 gap to start. Pinblock had a seam between bass and tenor and was most separated there. It all came back together with no problems. Randy Mangus Mangus Piano Service 140 Atkinson Ave. Wheeling, WV 26003 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/78/17/f2/46/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC