$30 to take of the key, and ease it? I hope it was a grand, otherwise, I would consider the charge, too much. Regards, John M. Ross Windsor, Nova Scotia, Canada jrpiano@win.eastlink.ca ----- Original Message ----- From: "Dean May" <deanmay@pianorebuilders.com> To: "Pianotech" <pianotech@ptg.org> Sent: Tuesday, June 15, 2004 10:51 AM Subject: RE: Easing key bushings, dirty but effective > I just did the screwdriver trick on a PSO in a church basement yesterday. It > was an upper treble note where nobody plays. Now the church didn't know the > key was binding (at least nobody complained), they wouldn't have wanted to > pay me $30 to disassemble the thing to fix it right and I was able to get it > functioning with the screwdriver trick in a matter of seconds at a no > charge. I don't consider it to be "slocky" in such a setting. I am doing the > customer a big favor, keeping their little PSO functioning for Sunday school > at minimal cost. > > Dean > > Dean May cell 812.239.3359 > PianoRebuilders.com 812.235.5272 > Terre Haute IN 47802 > > -----Original Message----- > From: pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org]On Behalf > Of Richard Moody > Sent: Monday, June 14, 2004 11:06 PM > To: 'Pianotech' > Subject: Easing key bushings, dirty but effective > > What is the right tool? And when you consider what that tool does, what > is wrong with the screwdriver jammed between the keys unless you go so > far as to bend the key pin. OK it has to be done by someone who knows > what key bushings are all about. Key bushing easing pliers are > monsters in the wrong hands as far as creating sideways play. If > forcing the key against the pin back and forth alleviates the situation > what is wrong with that. The path of least stress so to speak. > ===ric > > > -----Original Message----- > > From: pianotech-bounces@ptg.org > > [mailto:pianotech-bounces@ptg.org] On Behalf Of Joseph Garrett > > Sent: Saturday, April 03, 2004 7:14 PM > > To: pianotech@ptg.org > > Subject: Re: Yamaha Console, Sharps checking on trill with sustain > > > > > > Dean May said: "And yes, jamming a screwdriver between keys > > while holding them down = (this makes the bushing fully > > engage the pin where the binding occurs) = and twisting back > > and forth is a quick and dirty method of easing front = rail > > bushing. Just don't tell anyone. ;-)" > > > > Captain of the Tool Police here. TSK TSK! Dean! I hope to god > > you don't do that!???? Let's all use the right tool, (and > > technique), for the appropriate job. Sheesh! IMO, > > perpetuating that sort of slocky work, (or even talking about > > it), makes my skin crawl! > > > > Joe Garrett, RPT, (Oregon) > > Captain, Tool Police > > Squares Are I > > > > > > _______________________________________________ > > pianotech list info: https://www.moypiano.com/resources/#archives > > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC