Are these hooks by any chance flat steel? If not, how do you prevent chipping the paint? At 06:31 PM 6/25/2004, you wrote: ><< like web straps that the > >movers use but with "D" rings sewn into each end. The straps could be only > >a couple of feet long and since they are 2" wide they would provide plenty > >of support without digging in. Has anyone tried this before? Are there any > >other ideas out there for replacement of the ropes? >> > > I have had good luck with the simple cam anchored nylon tie-downs that >you can buy at Wal-Mart. The hooks on the end will go under the plate in the >holes, and can be doubled around the struts if you want to put both hooks on >the hoist. They are cheap, strong, simple, and adjustable. >Regards, > > > >Ed Foote RPT >http://www.uk-piano.org/edfoote/index.html >www.uk-piano.org/edfoote/well_tempered_piano.html > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives Greg Newell Greg's piano Forté mailto:gnewell@ameritech.net
This PTG archive page provided courtesy of Moy Piano Service, LLC