This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment I'm working on one of those M&H uprights with those flat brass springs = between the jack and the hammer butt catcher. Is there an adjustment for = those? Some of them may have been bent out of shape on the reset when = the bridle straps were off. Most of the hammers show a wink at letoff = but some don't making it tough to determine the exact point of letoff. = Also the hammers want to check at 3/8 inch. Would that be the normal = setting? Thanks Keith Roberts ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/ef/7d/a5/0c/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC