Thanks, Jon. I was just hoping I wouldn't have to do all that! :-) Avery At 05:39 PM 3/25/04, you wrote: >Avery, >If no one has the specs in a db, then simply measure the speaking length, >core and wrap of its neighbors. The string makers can put it in between. > >Measure the hitch pin to winding and the length of the winding (as >ascertained from adjacent strings). >A general 'rule of thumb' which I use for these replacements: >Subtract 1/8" from hitch pin to winding and 1/4" from length of wrap. >ie. 5" h/p to winding, 48" wrap. >I'd order 4 7/8" h/p to winding, 47 3/4" wrap. >This allows for the stretch once the wire is at pitch. > >So you can ask for the core and wrap to be calculated >but the lengths are to be to your specs for an even line. > >Regards, > >Jon Page, piano technician >Harwich Port, Cape Cod, Mass. >mailto:jonpage@comcast.net >~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC