>Hi Ron, > >If this is so why are the tenor plain steel strings the very most affected >by humidity change? Hi Don, The plain wire low tenor strings are typically at a much lower break%, and go out of tune farther for a given tension change. Wrapped strings at a higher break% down there are much less reactive. They are also in an area of the board that DOES change crown height more than the treble. Interestingly, the low tenor changes more than the math of the bridge pin angle, bridge height, and soundboard crown height account for, so more is happening here than is being covered by our simple speculations. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC