Wait a minute...your invoice says A440 on it so you better be tuning to A440. My invoices also say A440 but I'm not a purist....;-] David I. ----- Original message ----------------------------------------> From: James Grebe <pianoman@accessus.net> To: Pianotech <pianotech@ptg.org> Received: Thu, 4 Nov 2004 13:57:46 -0600 Subject: Re: A440 tolerances >Sorry, >I guess I would have to say , it depends. If it is a church or school then >right on. It is a judgment call, being honest with you. Some clients are >more accurate than others. >Is my answer a cop out? maybe >Jim >James Grebe >Piano-Forte Tuning & Repair >Creator of Handsome Hardwood Caster Cups >(314) 608-4137 >WWW.JamesGrebe.com >1526 Raspberry Lane >Arnold, MO 63010 >BECOME WHAT YOU BELIEVE! >pianoman@accessus.net >----- Original Message ----- >From: "Don" <pianotuna@accesscomm.ca> >To: "Pianotech" <pianotech@ptg.org> >Sent: Thursday, November 04, 2004 12:35 PM >Subject: Re: A440 tolerances >> Hi James, >> >> You missed my point. You said A-440. Does that mean that A440.25 is not >> acceptable to you? Or A439.75? What is your own particular standard on the >> "tolerance"? >> >> At 12:04 PM 04/11/2004 -0600, you wrote: >>>Hi Don, >>>I do my best to leave it at A-440 and stable and explain the movement it >>>may >>>have if it is a pitch raise. Character is what you do when no one else is >>>listening. >>>James Grebe >> >>>----- Original Message ----- >>>From: "Don" <pianotuna@accesscomm.ca> >>>Subject: A440 tolerances >>> >>>> Hi James, >>>> >>>> Is that "exactly" A 440 or is there some "tolerance" built into the >>>> figure >>>> A440 >> >> Regards, >> Don Rose, B.Mus., A.M.U.S., A.MUS., R.P.T. >> Non calor sed umor est qui nobis incommodat >> >> mailto:pianotuna@accesscomm.ca http://us.geocities.com/drpt1948/ >> >> 3004 Grant Rd. >> REGINA, SK >> S4S 5G7 >> 306-352-3620 or 1-888-29t-uner >> _______________________________________________ >> pianotech list info: https://www.moypiano.com/resources/#archives >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC