A440 tolerances

[Farrell]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
"...lands at +3cents, I notate that on my "tuning record" card AND the =
bill."

Yeah, so do I. And in this case I would note A441 - for the average =
Joe......   ;-)

Terry Farrell
  ----- Original Message -----=20
  From: Joe Garrett=20
  To: pianotech=20
  Sent: Saturday, November 06, 2004 12:07 AM
  Subject: Re: A440 tolerances


  Farrell said: "But yeah, for the =3D
  average Joe down the street, I usually float the pitch (if it is =
sharp) =3D
  and simply indicate the closest whole number hertz value on the =
receipt"
  Terry,
  There ya go again! Using my name, (and Goss'), in vain! TSK!
  I do things a bit different. I usually am shooting to 440cps, dead on. =
However, we all know the darned things don't cooperate. If the final =
pitch, (AND I hope ALL of you check the pitch when you are Done!), lands =
at +3cents, I notate that on my "tuning record" card AND the bill. This =
information also goes into the client's data base, for future reference. =
(the darned cards grow legs!) Also, I note the temperature at the time =
of the tuning, so I have an idea what's occured to make the piano sharp =
this time, etc., etc. Works for me & the client(s)
  Best Regards,
  Joe Garrett, R.P.T.
  Captain, Tool Police
  Squares R I
---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/31/d8/21/6d/attachment.htm

---------------------- multipart/alternative attachment--