I don't have the picture before me ( and can't find it ) but wouldn't that one tend to dent the flange with specific contact points? Thump --- Keith McGavern <kam544@gbronline.com> wrote: > At 6:34 PM -0800 11/7/04, gordon stelter wrote: > >I think the "single wave flat rim" variety is what > >we'd want to use. Any argument? > > > >--- Keith McGavern <kam544@gbronline.com> wrote: > > > Here is a representative picture of the actual > >> washer I was > >> referring, and its official name, Spring Wave > >> Washer: > >> > > > http://www.itwac.com/sw.html > > You'll receive no argument from me as to what type > you want to use, > or what you think others want to use, but the one > you mention is not > one I was referencing. > > The three wave spring washer is what I was > specifically referencing > as the picture indicates in the web site link that I > provided. > > Keith > -- > Keith McGavern > Registered Piano Technician > Oklahoma Chapter 731 > Piano Technicians Guild > USA > > _______________________________________________ > pianotech list info: > https://www.moypiano.com/resources/#archives > __________________________________ Do you Yahoo!? Check out the new Yahoo! Front Page. www.yahoo.com
This PTG archive page provided courtesy of Moy Piano Service, LLC