You ought to just call Sanderson at 800.327.8440. Ask Paul your questions. David I. ----- Original message ----------------------------------------> From: Carl Meyer <cmpiano@comcast.net> To: <pianotech@ptg.org> Received: Tue, 9 Nov 2004 20:12:45 -0800 Subject: accutuner >I have an accutuner 11 fac type. I bought it used and it had not been used >for months. The battery was completely dead. It finally took a charge after >charging it several times. It seemed to work okay. I now want to replace >the batteries. I can handle that okay. >My question is: How can I be sure the program is still okay? I thought >that if I manually programmed FAC to as an example to F=6, A=5, and C=4 >then see what the stretch figures would be at a sample of notes like all >"A"s and "D"s. >I can do that before and after battery replacement, but I don't know exactly >what the numbers should be. >Anybody with a recently calibrated unit like mine want to run those numbers >so that I can compare? I'd appreciate it. Thanks >Can the memory battery be replaced as well without messing up the thang? >Carl Meyer Ptg assoc >Santa Clara, Ca. >_______________________________________________ >pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC