This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Re: About CheckingBut raising key height also changes the geometry. I = think I'll give it a try. If it works, I can always add more punchings = to the front rail to maitain aftertouch, eh? William R. Monroe Madison, WI Assoc. ----- Original Message -----=20 From: David Ilvedson=20 To: pianotech@ptg.org=20 Sent: Thursday, November 11, 2004 7:01 PM Subject: Re: About Checking But what is happening when you raise the key? More aftertouch... David I. ----- Original message ----------------------------------------> From: David Andersen <bigda@gte.net> To: Pianotech <pianotech@ptg.org> Received: Thu, 11 Nov 2004 15:03:48 -0800 Subject: Re: About Checking I will be checking that, but any other thoughts on why the hammers = won't go deeper into check? Try raising the key height on a sample key; sometimes that solves the = problem. ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/0e/55/b1/2e/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC