#321 Joe Goss RPT Mother Goose Tools imatunr@srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "JAMES DALLY" <jdally@ecr.net> To: "Pianotech" <pianotech@ptg.org> Sent: Monday, November 15, 2004 6:29 PM Subject: Re: fine grit hammer filing; Dremel tool > Do you sell the voicing tray? > ----- Original Message ----- > From: "Joe And Penny Goss" <imatunr@srvinet.com> > To: "Pianotech" <pianotech@ptg.org> > Sent: Monday, November 15, 2004 11:54 AM > Subject: Re: fine grit hammer filing; Dremel tool > > > > Hi Cy, > > That is the Carl Meyer electric Knife adaption. > > Works great and fast if you can control it. > > What I use are several shoeshine paddles #s 305- 1,2,and 3. With the 305-3 > > paddle, one can change the grit being used quickly. The 1 and 2 paddles > > are > > 60 grit emery paper and are glued to the paddle with contact glue. The > > paper will eventually tear at the edge of paper and paddle, and one must > > tear off an inch of paper and reglue the good paper to the paddle. 15 > > inches > > of paper lasts over a year for me. > > To support the hammer I use voicing tray #321. The tray works on both > > uprights and grands with a spacer used on uprights . > > Joe Goss RPT > > Mother Goose Tools > > imatunr@srvinet.com > > www.mothergoosetools.com > > ----- Original Message ----- > > From: "Cy Shuster" <741662027@theshusters.org> > > To: "Pianotech" <pianotech@ptg.org> > > Sent: Monday, November 15, 2004 9:09 AM > > Subject: Re: fine grit hammer filing; Dremel tool > > > > > >> Joe, > >> > >> Is this the one you mean? > >> http://www.mothergoosetools.com/other_tools/hammer_shaper.shtml > >> > >> So you just slice the felt from the side? Are there different-shaped > >> cutters? Can you use it with the hammer in the action? (How do you > > support > >> it?) > >> > >> --Cy Shuster-- > >> Bluefield, WV > >> > >> ----- Original Message ----- > >> From: "Joe And Penny Goss" <imatunr@srvinet.com> > >> To: "Pianotech" <pianotech@ptg.org> > >> Sent: Monday, November 15, 2004 10:03 AM > >> Subject: Re: fine grit hammer filing; Dremel tool > >> > >> > >> > Hi David, > >> > That is exactly the same experience that I had. Tried all of the > > motorized > >> > ways after first finding that the paddle made my elbows flare up. My > >> > system > >> > is really just a non-motorized version of Carl Meyer's electric knife. > >> > Becuase I can control the speed of the removal of felt I remain in > > control > >> > of the results. Not so withthe Dremel, McCall, and meyer system. That > >> > is > >> > not > >> > to say that there are not those who are quite skillful with those > > methods, > >> > but I am diffinately not <G> > >> > Joe Goss RPT > >> > Mother Goose Tools > >> > imatunr@srvinet.com > >> > www.mothergoosetools.com > >> > >> > >> _______________________________________________ > >> pianotech list info: https://www.moypiano.com/resources/#archives > >> > > > > _______________________________________________ > > pianotech list info: https://www.moypiano.com/resources/#archives > > > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives >
This PTG archive page provided courtesy of Moy Piano Service, LLC